Thanks Thanks:  2
Likes Likes:  53
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: PNW NEW MEMBER

  1. Top Of Page | #1
    Merica knight train's Avatar

    User Info Menu

    PNW NEW MEMBER

    Hey ya'll. I'd just like to start off with this is by far the best forum I've had anything to do with. So I just bought a black 2012 2500 4x4 right around 2 months ago and I'm not a rich man I've worked for every thing that I've ever got. My profession I'm a mill wright. Since then I've been busy blowing threw my savings. The very next day put 5% tint all the way around. Two days later 6 inch lift 37s Toyos MT the very next day I got the edge cts2 programmer ran it for 3or 4 weeks I liked the programmer it's really pretty good it's what I ran on my 2002 24v I had gone with hd4edge and plus juice on her. Anyway. I couldn't do my deletes so I went ahead and bought race me ultra. I did DEF,EGR Deletes last week end I'm cut out cat def and ran down to local muffler shop and had him weld up a 4 inch peace of pipe. I truly couldn't be happier. With the race me I'm running 60hp 23deg timing 1850 rail pressure quick spool turbo setting with stock 68RFE tuning. I drive back road highway lots of sharp turns up hill down hill on the gas off the gas driven 90miles round trip I'm getting 18.5 mpg. Still thinking bout running the 120hp tune I've been ready a ton of good things about it but I wont lie my right foot LOL heavy cause sometimes you just need to feed a lil speed to ur ride?. So maybe I'll stay with the 60hp for a bit. Glad to be apart of this amazing group.


  2. Top Of Page | #2
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu

    Re: PNW NEW MEMBER



    Jim


    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan

  3. Top Of Page | #3
    MOD watersupply189's Avatar

    User Info Menu

    Re: PNW NEW MEMBER

    Quote Originally Posted by Merica knight train View Post
    Hey ya'll. I'd just like to start off with this is by far the best forum I've had anything to do with. So I just bought a black 2012 2500 4x4 right around 2 months ago and I'm not a rich man I've worked for every thing that I've ever got. My profession I'm a mill wright. Since then I've been busy blowing threw my savings. The very next day put 5% tint all the way around. Two days later 6 inch lift 37s Toyos MT the very next day I got the edge cts2 programmer ran it for 3or 4 weeks I liked the programmer it's really pretty good it's what I ran on my 2002 24v I had gone with hd4edge and plus juice on her. Anyway. I couldn't do my deletes so I went ahead and bought race me ultra. I did DEF,EGR Deletes last week end I'm cut out cat def and ran down to local muffler shop and had him weld up a 4 inch peace of pipe. I truly couldn't be happier. With the race me I'm running 60hp 23deg timing 1850 rail pressure quick spool turbo setting with stock 68RFE tuning. I drive back road highway lots of sharp turns up hill down hill on the gas off the gas driven 90miles round trip I'm getting 18.5 mpg. Still thinking bout running the 120hp tune I've been ready a ton of good things about it but I wont lie my right foot LOL heavy cause sometimes you just need to feed a lil speed to ur ride?. So maybe I'll stay with the 60hp for a bit. Glad to be apart of this amazing group.
    Welcome friend!!! Sounds like you got a beast there!


    2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

    2016 RAM 3500 4x4 Laramie Crew Cab ,G56

  4. Top Of Page | #4
    dodgemark's Avatar

    User Info Menu

    Re: PNW NEW MEMBER

    Welcome!!!


    Sent from my iPhone using Tapatalk


  5. Top Of Page | #5
    DDP's Avatar

    User Info Menu

    Re: PNW NEW MEMBER

    Welcome bud! Glad to have ya here.

    Matthew 6:9-13, 2 Corinthians 5:20
    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email us at:
    sales@ddpmotorsports.com
    www.ddpmotorsports.com


  6. Top Of Page | #6
    david3gen's Avatar

    User Info Menu

    Re: PNW NEW MEMBER

    Welcome @Merica knight train


    Sent from my iPhone using Tapatalk

    2006 dodge ram 2500 laramie crew cab 5.9 cummins. 10x20 et-24 fuel offroad with 275.60r20 tires. bully dog gt tuner. 48re ATS built tranny triple disc converter ATS oilpan and transgo quick shifter. 4" turbo back exhaust. brembo discs and pads

  7. Top Of Page | #7
    Diesel Babe cumminsbadgirl's Avatar

    User Info Menu

    Re: PNW NEW MEMBER

    Hello and welcome @Merica knight train
    Enjoy our forum!
    Nice intro!



    "Cumminsbadgirl"
    2014 Cummins Mega 3500 ( Aisin ) 4X4
    MM3 Tuned by Double R Diesel


    2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover

    Previous "Cummins Badgirls" :
    2006 Cummins 2500 4x4
    2012 Cummins 2500 4x4

  8. Top Of Page | #8
    walla2k5's Avatar

    User Info Menu

    Re: PNW NEW MEMBER

    Welcome!

    2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm

  9. Top Of Page | #9
    Basic Member

    User Info Menu

    Re: PNW NEW MEMBER

    Welcome man! I'm on the east side of Washington.

    Sent from my SM-G950U using Tapatalk


  10. Top Of Page | #10

    User Info Menu

    Re: PNW NEW MEMBER

    Welcome and hi from the Tri Cities


Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •