So I get a rough idle every 15 to 20 seconds but only when the heater is on. It actually killed the truck at a light once. Heater off it idles beautifully.
So I get a rough idle every 15 to 20 seconds but only when the heater is on. It actually killed the truck at a light once. Heater off it idles beautifully.
Wow. Never heard of a computer controlled engine stalling with electrical load. I want to hear the outcome of this 1
2016 ram 2500 hd slt mega-cab cummins g-56 (metallic gray pearlcoat or something of the sort) deleted and custom tuned by Ray (the king) @ doublerdiesel on mm3 platform with 5" turbo back exhaust by flo-pro & DD valair organic clutch
looking for 30,000 gpm injectors @ a fair price btw LOL
it was weird, it started the rough idle like it has been when heater is on and started revving higher so i threw it in neutral and it sputtered and died. It restarted with no issues but was definitely strange.
Could the truck wiring have been tinkered with before you?
2016 ram 2500 hd slt mega-cab cummins g-56 (metallic gray pearlcoat or something of the sort) deleted and custom tuned by Ray (the king) @ doublerdiesel on mm3 platform with 5" turbo back exhaust by flo-pro & DD valair organic clutch
looking for 30,000 gpm injectors @ a fair price btw LOL
Don't know, it had yet to do it again but still has a rough idle when I run the heater. Does have a programmer on it, wonder if something's not right...
I’m assuming when you say ‘heater’ you are talking about the blower motor. I would check the connector going to your blower motor resistor. Pull it off and look for corrosion. The resistor sits next to the fan motor and when the a/c is on in humid climates, condensation gets in there and causes corrosion which could be resulting higher resistance in the circuit.
2016 3500 Laramie Mega DRW Aisin 3.73
I'd like to hear this. Never had this issue on mine .. yet.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
Never heard of this nor had an issue like this on my 06
Sent from my iPhone using Tapatalk Pro
--Work gives you meaning and purpose, Life is empty without it--
@Mitch Van Epps
Yeah but the engine would still compensate for the load. If the load were that high, he'd be blowing a fuse. He's saying the engine is dropping out.
I'm leaning towards RF noise from the motor. I don't know if they are brushless motors or not. I suppose the resistor could oscolate some noise under a load too.
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Yeah it's acting more like a load on the motor, reminds me of when my a.c. condenser was going out. Watched it today and the drop in rpms is minimal, might just be that I notice everything and think more of it then what is really going on.
Bookmarks