Calling all 3500s with factory air bags and suspension mods

[JustynK]

Looking for any 3500s with factory airbags and suspension mods.

Pictures advice whatever I can find.

Mine is a 2018 3500 Mega Cab with the factory bags. Sits nearly level but I want to do Thuren 1.75 coils in the front which I am worried is going to make the truck nose high and I want to keep the stance I have now just get taller so I can run 20x9 +1 offset wheels withmy current 35/12.50 tires.

Considering putting a 2 inch block and getting a 2 inch airbag spacer made for the rear and some shocks not sure what there yet.

 0 Comment(s)

[HunterDan]

Keeping an eye on this as I’m about to pick an an ‘18 3500 long bed w/factory air ride.

 0 Comment(s)

[Ramin&Cummin]

I have a 2019 2500 with factory air ride.

I used the Carli 2.5 setup.

I also added 1.5 spacer above the rear airbags.

The kit came with longer rods to maintain factory settings and came with spacers for bump stop.

I got the rear kit from Top Tier Suspensions.

You will talk to Zane.

 0 Comment(s)

[Rhinopkc]

The 3500 is much easier than the 2500.

You do not have to mess with the auto level sensors because they index off of the top of the leaf pack.

This means you can just put a small block in if needed, and the truck won’t know any better.

 0 Comment(s)

[greg879]

When u put 2.5 in the front did u have to do anything with the steering box are or sway bar ect?

Looking to do same thing in the rear looks easy enough.

 0 Comment(s)