Thanks Thanks:  1
Likes Likes:  4
Results 1 to 3 of 3

Thread: Tapping Fuel pressure gauge in with fass pump

  1. Top Of Page | #1
    Cummins-fanatic's Avatar

    User Info Menu

    Tapping Fuel pressure gauge in with fass pump

    So I have a 2001 ram 2500 24valve it has a fass 95 on it. I need to install gauges fuel press, egt, boost. My issue is where in the world do I tap the fuel press in at since I have the big fass pump line ran right to the vp44? And any recommendations on gauges the glow shift gauges are absolute crap. Have a set on my 98 and will never give those people another penny.


  2. Likes walla2k5, watersupply189 liked this post
  3. Top Of Page | #2
    Old & Grumpy! Polaraco's Avatar

    User Info Menu

    Re: Tapping Fuel pressure gauge in with fass pump

    @Dude's Diesel Performance can help you out with the gauges.

    There is a fitting available that goes right on the VP44 in the fuel stream. It has an 1/8 NPT hole tapped in it. Or, just get a couple of hose barbs, a T and bushing to cut a gauge into the line.


    2003- 3500 RWD Automatic.
    S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95,
    50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC

  4. Thanks Cummins-fanatic thanked for this post
    Likes watersupply189 liked this post
  5. Top Of Page | #3
    Cummins-fanatic's Avatar

    User Info Menu

    Re: Tapping Fuel pressure gauge in with fass pump

    Ok thanks.


  6. Likes watersupply189 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •