I’m working on building myself an exhaust break for my 94 12v and was wondering if anyone had any ideas on how big of relief holes I need on a 3” down pipe
Thanks for talks time
I’m working on building myself an exhaust break for my 94 12v and was wondering if anyone had any ideas on how big of relief holes I need on a 3” down pipe
Thanks for talks time
I made one 2 years ago. It didn't work because my ram wasn't big enough and/or I didn't design in enough leverage. The back pressure pushed it open. I didn't have any relief holes because the pipe was imperfect. I have since acquired a BD brake and that has no weep holes in it either. I don't know that they are necessary.
I started a thread about it somewhere around here
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Bookmarks