2001 Ram 2500
A/C blowing cold, but air only blowing out of the defroster and floor vents, doesnt matter what position selection I make.
Was working fine until it sat for 2 months with tranny problems.
Any ideas?
Sent from my VS988 using Tapatalk
2001 Ram 2500
A/C blowing cold, but air only blowing out of the defroster and floor vents, doesnt matter what position selection I make.
Was working fine until it sat for 2 months with tranny problems.
Any ideas?
Sent from my VS988 using Tapatalk
Kind of sounds like the blend doors aren't working correctly. I believe they will throw a code if defective. Have you hooked a scanner to it yet?
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
Agree with @walla2k5 on this. Some of the blending doors are broken. Happend on my first truck. The job was a pain in the ***
Sent from my iPhone using Tapatalk
2006 dodge ram 2500 laramie crew cab 5.9 cummins. 10x20 et-24 fuel offroad with 275.60r20 tires. bully dog gt tuner. 48re ATS built tranny triple disc converter ATS oilpan and transgo quick shifter. 4" turbo back exhaust. brembo discs and pads
Have not hooked up a scanner yet, will do when it cools off, 99 outside right now, no shade available
I can move the blend door actuator arm in and it blows correctly, but when I let it go, it extends back out again.
Read a lot about vacuum leaks too...
Sent from my VS988 using Tapatalk
Got it!
Vacuum leak created with install of new transmission.
Have to verify with trans shop, before I call it complete, but we got her working. 5 hours troubleshooting and it was a 60 cent vacuum cap...sheesh!!
In case anyone else with 2nd gen has a vacuum leak, I found a great drawing of the 2nd Gen vacuum system.
Sent from my VS988 using Tapatalk
Awesome that you got it figured out!
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
Oh man, I misread what year the pickup was, thought it was your 2011. Glad you got it all worked out!
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
Good job bud glad you got it fixed
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
I was going to say they were vacuum controlled. I see you got it. Good Job
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Bookmarks