Warp tuning question

**KeepEmRollin14** · 05-30-2018

If Im tuning in warp and need to check my injection timing for main can I copy table into efilive and use the timing calc to check where my inj timing is falling in the specified ranges, i.e. 50/50 split? Should the 50/50 split be as close as possible to 50/50 or can it be say 54/46? Will this be true at all ranges?

Sent from my iPhone using Tapatalk

0 Comment(s)

**Dieseldaddy87** · 05-17-2019

Originally Posted by KeepEmRollin14

If Im tuning in warp and need to check my injection timing for main can I copy table into efilive and use the timing calc to check where my inj timing is falling in the specified ranges, i.e. 50/50 split? Should the 50/50 split be as close as possible to 50/50 or can it be say 54/46? Will this be true at all ranges?

Sent from my iPhone using Tapatalk

I'm actually in the middle of developing an excel spreadsheet to calculate timing for my 2018 cummins in warp tuning. What year truck are you working on?

Sent from my LG-H910 using Tapatalk

0 Comment(s)

**KeepEmRollin14** · 05-17-2019

Well i was working on a 2014 now it will be a 2018.

Sent from my iPhone using Tapatalk

0 Comment(s)

**Jcvititow** · 05-17-2019

I was trying to make one for warp but gave up after not being able to figure out the formula to input into spreadsheet. im working on my 2012 trying to figure somethings out as I go.

0 Comment(s)

**Dieseldaddy87** · 05-17-2019

I am willing to share what I have come up with but all that I ask is that whoever wants the document to provide feed back and help me improve it. If you would like to participate let me know. I dont want to share it on here yet because I want to be sure its successful and have a few people be proofing eyes for me.

Sent from my LG-H910 using Tapatalk

0 Comment(s)

**Jcvititow** · 05-17-2019

I sure would sir and greatly appreciate it. I'm no pro but I'm getting my feet wet in diesels for sure. Been using efi lives calculator but it is a pain having to move things around between the two programs.

0 Comment(s)

**Dieseldaddy87** · 05-17-2019

Originally Posted by Jcvititow

I sure would sir and greatly appreciate it. I'm no pro but I'm getting my feet wet in diesels for sure. Been using efi lives calculator but it is a pain having to move things around between the two programs.

Send me an email then if you would. And let me know when you do so I can look for it (in case it goes to spam) and ill send it to you that way. And i would appreciate it not freely distributed so as to keep others from getting a possible non-finalized document if that makes sense. I have my name tied to this and I want to be sure its top notch before its released to the interwebs LOL.

Sent from my LG-H910 using Tapatalk

0 Comment(s)