Engine Light

[jk6672]

I deleted this week with EZ LYNK HPP SOTF and a 5" TBE, but have an engine light on. The EZ LYNK isn't registering any codes thrown. I've been told it's because I have the AISIN tranny, and the light will go away after a few cycles, but it hasn't. It's still shifting ruff unless I baby the throttle. I'm wondering if there was something I needed to unplug that I didn't because I didn't unplug anything under the hood except to install the SOTF switch. I also have the HPP EGT probe, which is basically an extension for the first probe from the factory exhaust, the rest were just unscrewed, electrical tape wrapped and zip tied out of the way, along with the DEF plug that was removed from the factory exhaust. Is there something I needed to unplug that could make the engine light come on? I have a pusher intake, intercooler pipes and EGR delete I want to tackle next, but I want to figure this out first.

 0 Comment(s)

[walla2k5]

I would contact the outfit you bought your tuning from. They may be able to shed some light on this.

 0 Comment(s)

[HKBIGDADDYDIESELDAN]

I would contact the outfit you bought your tuning from. They may be able to shed some light on this.

X2 contact company you got tuning from good luck

 0 Comment(s)

[Polaraco]

Unfortunately, these deletes can't be done on the cheap

 0 Comment(s)

[HKBIGDADDYDIESELDAN]

Unfortunately, these deletes can't be done on the cheap

100% agreed and he should’ve gone with an MM3 and Rays tunes he wouldn’t be having those problems

 0 Comment(s)