Just ordered this setup for my 2018 and input on install is appreciated!
Sent from my iPhone using Tapatalk
Just ordered this setup for my 2018 and input on install is appreciated!
Sent from my iPhone using Tapatalk
Welcome to the family
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Very great kit you ordered bud congrats
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
If its the same kit I installed be prepared to sand off the coating on the fuel lime prior to cutting.
I drained my fuel filter housing before installing as welll, i had very little diesel come out of the line.
Have a link for the specific kit you went with?
Sent from my SM-G928W8 using Tapatalk
2012 Larmie LongHorn 4x4 Crew Cab Longbed, MM3 tuned by Double R Diesel, Air-Boss 67, Mega-Flo Throttle Valve Grid Heater, Sinister EGR & Cooler Delete, FloPro DPF Delete Pipe, 2 micron CAT Fuel Filter, Baldwin BF1212 Fuel/Water Sep, BD Rear Diff Cover
http://m.dieselfuelfilterkits.com/?u...referrer=#2846
Sent from my iPhone using Tapatalk
Nice filter kit. keep us updated on how your install goes.
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
Yeah thats the kit I just finished installing.
Drain the fuel filter housing and sand the fuel lines before you start cutting, otherwise it was a petty straight forward install. I'm very impressed with the kit.
Sent from my SM-G928W8 using Tapatalk
2012 Larmie LongHorn 4x4 Crew Cab Longbed, MM3 tuned by Double R Diesel, Air-Boss 67, Mega-Flo Throttle Valve Grid Heater, Sinister EGR & Cooler Delete, FloPro DPF Delete Pipe, 2 micron CAT Fuel Filter, Baldwin BF1212 Fuel/Water Sep, BD Rear Diff Cover
No your kit is a little different, mine retains the factory WIF sensor and water separator filter.
Sent from my iPhone using Tapatalk
Mine is located in the fuel filter under the hood. U must be running a newer truck
Sent from my SM-G928W8 using Tapatalk
2012 Larmie LongHorn 4x4 Crew Cab Longbed, MM3 tuned by Double R Diesel, Air-Boss 67, Mega-Flo Throttle Valve Grid Heater, Sinister EGR & Cooler Delete, FloPro DPF Delete Pipe, 2 micron CAT Fuel Filter, Baldwin BF1212 Fuel/Water Sep, BD Rear Diff Cover
Mine has one on the rear water separator and one under the hood in the front filter.
Sent from my iPhone using Tapatalk
Bookmarks