Anyone have procedure for replacing timing/gear case gasket? Not the front gear case cover that has seal but the gasket between gear case and engine. 2011 3500 6.7 cummins of course.
Anyone have procedure for replacing timing/gear case gasket? Not the front gear case cover that has seal but the gasket between gear case and engine. 2011 3500 6.7 cummins of course.
Why do you need to do that ? Is it leaking man if it is you are looking at one hell of a lot of work if it’s like my 97 5.9 which I imagine it is you have to pull everything off the front of the motor and in front of the motor if you don’t have the tools or the skill or the knowledge you need to find some one that does it will most likely take you most of a full weekend to do it
How many miles do you have on your truck? Good Luck
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
ALLDATAdiy.com is your friend for a lot of repair/replace procedures.
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
Not positive on where the leak was coming from. Hopefully it was just the front seal. I'm not afraid to do the job just like to know the details before begining. Like torque specs etc. I know some use wooden dows to hold tappet when removing cam instead of the "speciality" tools. I just went ahead and changed the front seal and sealed front cover. Will see what it does. BTW it only has 48k or so miles.
Sent from my SM-G900V using Tapatalk
Ok thanks
Sent from my SM-G900V using Tapatalk
No way in Hell with that little mileage should you have any leaks at all good job good luck
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
I'm in the same boat. 70,000 miles and its leaking.
Were going to tear into it in a couple weeks and see whats up.
Totally not looking forward to it!
Bookmarks