Much better running and generally give you better fuel mileage
Much better running and generally give you better fuel mileage
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Is that Proven? I've not read that.. I have read it saves wear on your valve train (what it's designed for) I truly think we all can get "Too Deleted"
I heard a guy say he deleted his Common rail back to lift pump? Because he thought it got better fuel mileage? WTH?
NO IT'S NOT A HEMI!
Sounds like he was blowing some smoke! Deleting the grid heater just removes that restriction for a little better air flow. I doubt you’ll see any benefit from it unless you have 150k miles on it and it’s solid soot! There are tons of restrictions in the intake and exhaust of these trucks and removing them just helps them inhale and exhale that much better.
2012 Ram 2500, 4x4, 3.73, 5” lift, 35" tires, Pure Performance TB, 5100s, 4" FloPro TBE, EGR valve/cooler/throttle delete, S&B CAI, GDP heater delete, GDP S2 air horn, Bestop Powerboards, RaceME Ultra Warp Tuning by DRD
I'm a diesel Newbie and was wondering what this delete is for?
The purpose of the grid heater delete is provide more air flow. With the grid heater in place you have a grid that is in the path of the air flow and overtime it does get clogged up if you do not remove and clean it.
It is a good little mod to do but by no means will it make you feel like you made a huge adjustment LOL.
Google grid heater delete and take a look at some of the pics that come up.
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
Thanks for the info! I'm trying to learn as much as i can without asking too many redundant questions. I'll add the to my delete list. LOL
LOL your very welcome and feel free to message me if you have anything else my friend! We are all here to help.
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
IF, it ain’t plugged with soot, I’d guarantee no one could tell weather it was in place or not. Until someone could show me dyno numbers to back it up, I’m going with a previous post where someone said it perfect “ too deleted “.
I'm sure this is a dumb question, but why delete the grid heater?
1. Grid heater bolt/nut issue (If you call it that). There have been a handful of cases where then nut holding the power cable for grid heater becomes loose, then when power is applied it arcs and essentially cuts the bolt and then the nut drops into your motor via intake side.
Not good.
2. Better air flow - some are caked with soot and don’t let air feed in very well.
For huge power then the grid heater wires/grid being removed will increase air flow.
I have mine left in place but unplugged.
2013 Ram 2500
John 3:16 - Philippians 4:13
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email me at:
mike@ddpmotorsports.com
www.ddpmotorsports.com
Bookmarks