Thanks Thanks:  0
Likes Likes:  2
Results 1 to 4 of 4

Thread: Whistle on start up

  1. 02-25-2018 Top Of Page | #1
    X-ray Dad
    X-ray Dad is offline
    Basic Member X-ray Dad's Avatar

    User Info Menu

    Whistle on start up

    I’ve got a 2010 Dodge Ram 2500 and after start up its making a loud whistle noise (like the tune) and won’t go but 3-4mph. I have a MM3 tuner installed and I have the 12V tune, whistle tune, and a lope tune installed to choose from. This noise sounds just like I’ve chosen the whistle tune to run. Im getting a P2262 code for turbocharger boost pressure not detected. I’ve removed the boost pressure sensor on the back of the intake snout and it was completely clogged with soot. Cleaned it with throttle body cleaner and reinstalled. I also removed the exhaust back pressure sensor and thoroughly cleaned out that passage. After these fixes it’s still not operating correctly. Any suggestions?

    Register To Reply
  2. Post Thanks / Like
    Likes Race Hartnagel liked this post
  3. 02-25-2018 Top Of Page | #2
    HKBIGDADDYDIESELDAN
    HKBIGDADDYDIESELDAN is offline
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: Whistle on start up

    Welcome to the family

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
    Register To Reply
  4. 02-25-2018 Top Of Page | #3
    HKBIGDADDYDIESELDAN
    HKBIGDADDYDIESELDAN is offline
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: Whistle on start up

    Quote Originally Posted by X-ray Dad View Post
    I’ve got a 2010 Dodge Ram 2500 and after start up its making a loud whistle noise (like the tune) and won’t go but 3-4mph. I have a MM3 tuner installed and I have the 12V tune, whistle tune, and a lope tune installed to choose from. This noise sounds just like I’ve chosen the whistle tune to run. Im getting a P2262 code for turbocharger boost pressure not detected. I’ve removed the boost pressure sensor on the back of the intake snout and it was completely clogged with soot. Cleaned it with throttle body cleaner and reinstalled. I also removed the exhaust back pressure sensor and thoroughly cleaned out that passage. After these fixes it’s still not operating correctly. Any suggestions?
    Who did you buy your tuner and tunes from ? If you bought them from Ray at DRD I would pm him and pick his brain

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
    Register To Reply
  5. 02-25-2018 Top Of Page | #4
    AnOldBiker
    AnOldBiker is offline
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu

    Re: Whistle on start up

    and to the forum @X-ray Dad



    Jim

    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
    Register To Reply
  6. Post Thanks / Like
    Likes walla2k5 liked this post
« Bit the Bullet | Power rear sliding window problem »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules