Thanks: 5
Likes: 10
I have been working on my headlights for a few weeks now and broke both the tabs off my driver side marker amber reflector removing it. I tried to glue it in place and it is pretty much ruined. If anyone has swapped out the clear markers and have a drivers side part laying around and they want to sell, I am willing to pay. I would go clear but I need to have amber reflectors to pass our safety inspections and I already have one sealed up
Help!!!!
Nutz! That's rotten luck.
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
BrentM thanked for this post
Ok, I'm very vague in knowledge here.
I do not know if the 2016's and the 2017's headlights are the same or not. But the best prices I've found for headlights are at 1AAuto and they show they cover up to 2016's. https://www.1aauto.com
If they fit the same, you might look there. Would be worth looking into. I've ordered from them in the past, and if you find your part, they get it to you fast.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
From what I understand is all the projector headlights are the same from 2013 - 2018. I was hoping to find just the reflector and not have to buy the whole light just to get it, if I do I will hunt through the couple of salvage yards for a damaged one. Thanks for the reply, their prices do look pretty good.Originally Posted by AnOldBiker
walla2k5 liked this post
Have you tried one of those plastic welders as they call it? Basically melts the plastic and you stick it back together?
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
I tried a plastic repair material that I thought would dry clear and it dried white so you can see it through the clear sections of the reflector so the one I have is ruined.
Here is a picture before I tried the plastic repair. Didn't think of the plastic welder, that probably would have worked.
Never heard of plastic welding very interesting
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Jeffrey98335 liked this post
A lot of body shops have “Nitrogen Plastic Welders”.Never heard of plastic welding very interesting
They work really well. Now these clear lenses are a polycarbonate so might not work perfect on them(the repair material isn’t clear) but for polypropylene, ABS, and TPO plastics they work really well
Hell everything is plastic these days. Seriously considered purchasing one for my own home use.
2017 Ram 3500 Laramie Crew Cab Short Bed w Gooseneck towing prep/Full Metal Jacket spray in Bed liner/TruXedo low profile bed cover
TonyTurbo liked this post
Ahhhh ok i gotcha now! Dang it! I'm sorry my friend.... I'm sure between all of us we can help get you set up to at least get you passed!
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
Have you tried plastic welding/bounding it? I've done it a few times for head light tabs and it worked great.
Sent from my SM-G930V using Tapatalk
BrentM thanked for this post
Posting Permissions
Register To Reply
Bookmarks