My Fumoto valve has worked perfectly also, what a great idea to put a zip tie on there to add a little extra protection, I have the plastic clip that does the same thing.
My Fumoto valve has worked perfectly also, what a great idea to put a zip tie on there to add a little extra protection, I have the plastic clip that does the same thing.
I've had the EZ once before. The one issue I had with it was loosing the screw in portion to drain it. The fitting that stays on the vehicle never leaked, and when I did drain it, it was easy and kept under control. But with the Fomoto valve, you can't miss-place/loose the part needed to screw in and start the drain process.
Oh, on my Fomoto valves un the beginning. the didn't have those plastic locking clips back then, and I used one of those squeeze type hose clips you use on hoses to barbed fittings. Worked great.
serveimage.jpg
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
Bookmarks