What did you all do after the DEF delete, did you drain the DEF tank? I'm considering draining it because I read it crystallizes if it sits too long.
Thanks: 17
Likes: 50
What did you all do after the DEF delete, did you drain the DEF tank? I'm considering draining it because I read it crystallizes if it sits too long.
Best thing to do is drain, a flush of clean water to clean out, let air dry and forget it.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
Thank you!
Originally Posted by AnOldBiker
IGOTACUMMINS thanked for this post
Let me know how you do it.... I tried to get mine to break loose as it looks like a twist lock on the bottom where the pump is, no dice, probably gonna put it on the lift this weekend and try again, the fill tube is about 6' before it hits the tank and there's a fitting that blocked me from inserting a piece of hose through it... thought about trying to energize the pump and have it empty itself but haven't got that far yet
WyomingHunter liked this post
You just need to pop the twist lock off with a hammer and a flat blade screw driver. Removal is counter-clockwise.
2015 Ram 3500 CCSB SRW 4x4 G56
2020 Ram 2500 CCSB 4x4 68RFE
Never ending project. Always adding something...
Yes, definitely drain and flush!! DEF will crystallize very badly, stuff is nasty.
Make sure to like us on Facebook!
Want a good daily dose of custom trucks? Check our Instagram!
We sell wheels& tires, lift kits, custom lighting, grills, light bars and more! Right Here!
I'll try it again this weekend, That's the way it looked to me but I couldn't get it to budge, I was starting to cut into the metal tabs...
walla2k5 liked this post
I need to do this also, then flush the line out. Any tricks for that operation? Maybe jam a garden hose nozzle in there and give it a blast?
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
Thank you.... got it out, drained, flushed the pump and reinstalled
IGOTACUMMINS thanked for this post
Awesome, I will try this on the weekend! Thank you guys.
walla2k5 liked this post
Posting Permissions
Register To Reply
Bookmarks