Thanks Thanks:  4
Likes Likes:  30
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: MM3 Tuner and Edge CTS2 Pillar Mount?

  1. Top Of Page | #1

    User Info Menu

    MM3 Tuner and Edge CTS2 Pillar Mount?

    Anybody know if the MM3 with fit inside of a Edge CTS2 Pillar mount, I like the flush mounted look of the Edge mount but wasn't sure if an MM3 would fit in place of a CTS2?


  2. Top Of Page | #2
    walla2k5's Avatar

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    Quote Originally Posted by SMASHER View Post
    Anybody know if the MM3 with fit inside of a Edge CTS2 Pillar mount, I like the flush mounted look of the Edge mount but wasn't sure if an MM3 would fit in place of a CTS2?

    I think I watched a video here or on you tube, showing how to make it fit. If I remember right you had to do some trimming, for the plug on the back of the MM3, but it fit.

    2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm

  3. Likes Power247, cumminsbadgirl liked this post
  4. Top Of Page | #3
    No Vacancy Power247's Avatar

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    Quote Originally Posted by walla2k5 View Post
    I think I watched a video here or on you tube, showing how to make it fit. If I remember right you had to do some trimming, for the plug on the back of the MM3, but it fit.
    I remember seeing it too. I'm still on the fence as to which way to go myself.

    Greg
    2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  5. Likes walla2k5, cumminsbadgirl liked this post
  6. Top Of Page | #4
    TH-64's Avatar

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    I modified my edge mount for the MM3. I like it because the tuner is tucked up against the pillar.

    Sent from my Samsung S-8 using Tapatalk... DRD tuned 2012 Ram 2500 CCSB, Saddle Brown Pearl

    2012 CCSB Saddle Brown Pearl... DRD tuned

  7. Likes walla2k5, Power247, cumminsbadgirl, nuckle liked this post
  8. Top Of Page | #5
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    Quote Originally Posted by SMASHER View Post
    Anybody know if the MM3 with fit inside of a Edge CTS2 Pillar mount, I like the flush mounted look of the Edge mount but wasn't sure if an MM3 would fit in place of a CTS2?
    Look at Ray from DRD he did it before they came up with the newer way to install MM3 you do have to do some trimming for the plug in the back of the MM3 and some more trimming to get it to fit inside the mount

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs

  9. Likes walla2k5, Power247, cumminsbadgirl liked this post
  10. Top Of Page | #6
    BrentM's Avatar

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    This is the old style Ray sold with the kit I bought.

    Is this the one you are looking for?



    The MM3 is bigger than the opening.

    I trimmed mine to fit the MM3 tight to the mount. Here is the part as it came to me.



    Notched top and bottom for the raised back of the MM3



    Made a mounting plate to lock it in



    Finished product



    The bad thing about this setup is I have to remove the MM3 to access the SD card slot. I have not had to do that yet.

    Brent
    2017 Ram 2500 Limited / 6.7 / 68RFE / BDS 8" Lift / 38 x 13.5 Trail Grapplers / 20 x 10 Hostile Wheels
    2020 Ram 2500 Tradesman / 6.7 / 68RFE
    1993 W250 LE / 5.9 12V / G360 - 5 Speed


  11. Top Of Page | #7

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    That's the mount yes, I like that fush mounted look.


  12. Likes cumminsbadgirl liked this post
  13. Top Of Page | #8
    walla2k5's Avatar

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    Quote Originally Posted by BrentM View Post
    This is the old style Ray sold with the kit I bought. Is this the one you are looking for?

    https://i.imgur.com/2gQzLeql.jpg

    The MM3 is bigger than the opening I trimmed mine to fit the MM3 tight to the mount, here is the part as it came to me.

    https://i.imgur.com/2RQ9TUfl.jpg

    Notched top and bottom for the raised back of the MM3

    https://i.imgur.com/MbHF4lfl.jpg

    Made a mounting plate for to lock it in

    https://i.imgur.com/CVM3DFRl.jpg

    Finished product

    https://i.imgur.com/zitrYGYl.jpg

    The bad thing about this setup is I have to remove the MM3 to access the SD card slot. Have not had to do that yet.
    Thanks for putting this up @BrentM.

    Sent from my XT1650 using Tapatalk

    2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm

  14. Likes Power247, cumminsbadgirl, david3gen liked this post
  15. Top Of Page | #9
    Stevent85's Avatar

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    Yes it will work with a little cutting. I attatched the cts base plate to the mm3 and dremeled out the bottom corner where the power plug is. You might need to shave material from the bottom of the pillar piece to get a more flush fit on the dash/windshield corner.

    Sent from my VS996 using Tapatalk

    2016 Ram 2500, Deleted & Tuned by DRD, 5 in Flo-Pro exhaust, REVMAX ZeroFlex Valve Body, Thuren 2.5 Fox suspension.

  16. Likes Power247, cumminsbadgirl, nuckle liked this post
  17. Top Of Page | #10
    Basic Member Udeluz's Avatar

    User Info Menu

    Re: MM3 Tuner and Edge CTS2 Pillar Mount?

    The CTS2 does not fit flush in the pillar pod. That pod was designed for the CTS which was smaller. The CTS2 fits outside of the pillar.


Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •