Has anyone had any issues mounting the new pillar monitor mount from Ray?
I can't get a good mount on mine unless I do some trimming.
Sent from my iPhone using Tapatalk
Has anyone had any issues mounting the new pillar monitor mount from Ray?
I can't get a good mount on mine unless I do some trimming.
Sent from my iPhone using Tapatalk
First I've heard of any problems.
2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm
@Double R Diesel maybe can shed some light on this for us.
Haha. Not sure where why or how the word couch ended up in that post I made!!!
Sent from my iPhone using Tapatalk
You have two options. Either tuck it down in the joint between the factory pillar and dash (which is how Autometer designed it to fit) or trim that tab of off. This is common with fitting these mounts. There is no such thing as perfect fit with any mounting solution. If you want a really tight fit, put some double sided tape on the back side to make it cling tight to the factory pillar.
Ray
Owner and Calibration Specialist
Double R Diesel
www.doublerdiesel.com
info@doublerdiesel.com
I used a Dremel tool
I used a pencil to lightly mark areas that needed very slight modification remember not to go to far you can always take more off but you can't put it back on.
I took my time and it turned out very nice
2012 RAM 3500 Mega cab Dually Longhorn H.O
Sagebrush Pearl
Sinister Diesel Egr delete,,AFE Turbo back 5"SS exaust,MM3 Tuned by Double R Diesel,S&B cold air intake,GDP throttle valve delete,AMSOIL,(arp625 headstuds comming soon)
Once again Ray from rocks and has all the right answers
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Thanks guys. I don't have a single issue doing trim work and custom fitting it to make it right but since this is my first truck I've done I wanted to make sure I wasn't missing anything. If it were a harley I would've grabbed my dremel and pencil before I even test fitted it. LOL. Thanks for the info Ray and thanks for all the help. Can't wait til that tuner ships I just ordered Friday!!!!
Sent from my iPhone using Tapatalk
Congrats bud great choice on getting MM3 from Ray you won’t be disappointed
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Bookmarks