Hey guys, I just bought a cab visor and I'm a little worried about putting it on. Cause I want to make sure it will not leak through the roof, any suggestions on what to do??
Hey guys, I just bought a cab visor and I'm a little worried about putting it on. Cause I want to make sure it will not leak through the roof, any suggestions on what to do??
Welcome to the family
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Make sure you drill the right diameter sized hole and follow directions and I would imagine use silicone to seal the holes
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Don't blame you for being concerned.. drilling holes in my roof would make me nervous too. X2 for sealing everything up really well with silicone.
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
Measure 10 times, cut once. And like the others said, use a good sealant... good luck!
Sent from my iPhone using Tapatalk
2017 Ram 2500 Laramie, Taken care of by DRD, Carli Leveling Kit, RBP 94r 20x9 Wheels, and 35" Nitto Ridge Grapplers
1997 Dodge Ram 2500 Laramie, too many to list...
.... and if you know someone who has done it successfully before, buy them coffee and have then standing by to instruct and help.
As mentioned ... sealant, measure 25 times and cut once.
For that is all you get up there.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
I did this on my first truck. A 03 gas guzzler. I would’nt recommend it. 6 big holes in the roof it did’nt leak but then again 6 big holes
Sent from my iPhone using Tapatalk
2006 dodge ram 2500 laramie crew cab 5.9 cummins. 10x20 et-24 fuel offroad with 275.60r20 tires. bully dog gt tuner. 48re ATS built tranny triple disc converter ATS oilpan and transgo quick shifter. 4" turbo back exhaust. brembo discs and pads
There was some rubber gaskets and ofcourse a lot of silicone
Sent from my iPhone using Tapatalk
2006 dodge ram 2500 laramie crew cab 5.9 cummins. 10x20 et-24 fuel offroad with 275.60r20 tires. bully dog gt tuner. 48re ATS built tranny triple disc converter ATS oilpan and transgo quick shifter. 4" turbo back exhaust. brembo discs and pads
Bookmarks