Upgrade Wheels/Tires on Stock Suspension

[6.7_Beige_Beast]

I want to upgrade to wider wheels and tires on my 2011 2500. I also don't wanna break the bank for suspension components so what larger wheel/tire size is best for a stock setup? If I do have to purchase suspension mods which ones? Thanks!

Dylan

Sent from my LG-H932 using Tapatalk

 0 Comment(s)

[Joe Froe]

1.jpg

I had 35x12.50 on 9'' wide wheels with just a level kit. I didn't have any issues with rubbing or anything. A buddy had 10'' wide wheels with 35's and he had to trim the pinch weld a little and the fender liner. Hope this helps!

 0 Comment(s)

[JBYRD8]

35s 20x10 2" leveling kit

 0 Comment(s)

[Custom Offsets]

I want to upgrade to wider wheels and tires on my 2011 2500. I also don't wanna break the bank for suspension components so what larger wheel/tire size is best for a stock setup? If I do have to purchase suspension mods which ones? Thanks!

Dylan

Sent from my LG-H932 using Tapatalk

Dylan, check our gallery out of all stock height Ram 2500's here- http://bit.ly/2lcyd1X

 0 Comment(s)

[Power247]

2012 stock front suspension, rear lowered 1" 20x9 +20 & 35/12.50s

slight rubbing on the fender liner at full lock. Zip tied the liner back, no rubbing at all now.

.

Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310

 0 Comment(s)

[HKBIGDADDYDIESELDAN]

I want to upgrade to wider wheels and tires on my 2011 2500. I also don't wanna break the bank for suspension components so what larger wheel/tire size is best for a stock setup? If I do have to purchase suspension mods which ones? Thanks!

Dylan

Sent from my LG-H932 using Tapatalk

Stock setup you can run 35/12.50/17 or aftermarket you can run 35/12.50/18 with -18 or 20 offset or 35/12.50/20 with same offset that is for 18 rims no wider then 9” rims aftermarket or you’ll end up doing some trimming in wheel well area

 0 Comment(s)

[6.7_Beige_Beast]

Thanks everyone! Got the info I needed.

 0 Comment(s)