Headlight adjustment

[Lynx0849]

Ok, silly question but...

2015 3500 Longhorn CTD

I found where to adjust but what tool is needed? I tried to see but could not make out how deep or what tool.

Thanks


Sent from my iPad using Tapatalk Pro

 0 Comment(s)

[watersupply189]

Ok, silly question but...

2015 3500 Longhorn CTD

I found where to adjust but what tool is needed? I tried to see but could not make out how deep or what tool.

Thanks


Sent from my iPad using Tapatalk Pro

It takes one of those star type head either a long screwdriver type or a socket one with a long skinny extension . (My mind has drawn a blank what it’s called. )If I’m not mistaken a #6 or #8. It’s been awhile since I adjusted my headlights. LOL


2016 Ram Laramie 3500, G56, 6.7, MM3 tuned by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

 0 Comment(s)

[BrentM]

Torx head, not sure of the size

 0 Comment(s)

[Aj Grubb]

I wanna say a 7mm will fit it as well as the torx. Maybe a torx 25

 0 Comment(s)

[watersupply189]

There see? I knew there was some folks that would know the name of that tool.
Try a 6,7 or 8 it’s gotta be one of those. LOL


2016 Ram Laramie 3500, G56, 6.7, MM3 tuned by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

 0 Comment(s)

[Lynx0849]

How long does it need to be?

I might have some 1/4” stuff that would work.

Lights are so high that the high beams don’t even hit the road. Empty, stock.

Hard to believe first owner put 60k on it with the lights so far off.



Sent from my iPad using Tapatalk Pro

 0 Comment(s)

[watersupply189]

How long does it need to be?

I might have some 1/4” stuff that would work.

Lights are so high that the high beams don’t even hit the road. Empty, stock.

Hard to believe first owner put 60k on it with the lights so far off.



Sent from my iPad using Tapatalk Pro

I used the longest extension I had about 6-8” I believe.


2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

 0 Comment(s)

[Lynx0849]

Update...

T20 torx about 6” long does it.

Now to figure which screw is up/down and which is left/right and clockwise or counter to lower.



Sent from my iPad using Tapatalk Pro

 0 Comment(s)

[watersupply189]

Update...

T20 torx about 6” long does it.

Now to figure which screw is up/down and which is left/right and clockwise or counter to lower.



Sent from my iPad using Tapatalk Pro

There ya go T20 torx! It’s been so long since I adjusted mine I couldn’t remember the size. LOL
I do know on my projectors that it will only adjust up and down. I couldn’t find where it would adjust side to side.


2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, 35x12.50 Nitto G2, HID headlights and fogs plus many many other add ons.....

 0 Comment(s)

[HKBIGDADDYDIESELDAN]

I wanna say a 7mm will fit it as well as the torx. Maybe a torx 25

They make metric torx as well as standard sizes

 0 Comment(s)