Thanks Thanks:  16
Likes Likes:  43
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 36

Thread: -24 offset?

  1. Top Of Page | #1
    Champs 6.7's Avatar

    User Info Menu

    -24 offset?

    So I just got my lift put on and toyo open country rt 37x12.50 mounted on the stock 20" Laramie rims. Needless to say I am rubbing the radius arms pretty bad. The rims I am looking at are the xd 128 Machined black 20x10 -24 offset and 4.56 backspacing. Will these work? I don't want alot of tire sticking past the factory flares but 2-3" is ok. Thanks guys!

    Sent from my SM-G935V using Tapatalk


  2. Thanks IGOTACUMMINS thanked for this post
    Likes IGOTACUMMINS, Power247, SGT-RAM liked this post
  3. Top Of Page | #2
    Champs 6.7's Avatar

    User Info Menu

    Re: -24 offset?

    Ok so I put on a set of 2" spacers that my buddy had for a temporary fix. I have no rubbing or clearance issues now and the tires stick out about 2.5". So what offset rim should I be looking at to duplicate what I have now so I can get rid of the spacers? The wife gave me the go ahead on new wheels so I want to order as soon as possible. Thanks!

    Sent from my SM-G935V using Tapatalk


  4. Top Of Page | #3
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    Re: -24 offset?

    "The grass is greener where you water it"


  5. Likes AnOldBiker liked this post
  6. Top Of Page | #4
    lcarrasco's Avatar

    User Info Menu

    Re: -24 offset?

    I believe factory offset is roughly 2 inches. A wheel with 0 offset will be about where your spacers sit. -24 will be about an extra inch out. There is 25.4 mm in an inch. How much lift do you have?


  7. Likes AnOldBiker liked this post
  8. Top Of Page | #5
    Champs 6.7's Avatar

    User Info Menu

    Re: -24 offset?

    4" lift right now

    Sent from my SM-G935V using Tapatalk


  9. Top Of Page | #6
    lcarrasco's Avatar

    User Info Menu

    Re: -24 offset?

    I have a feeling -24 will be too aggressive to fit 37's. I have a 3 inch lift and had to do trimming on the back side of the wheel well with a 9" wheel and +12 offset. I also had a 13.50 wide though. Ill post a pic of a pic on my computer to give you an idea with +12 and a 9" wheel. I got another phone and dont have it on here. Mac and android dont get along



  10. Likes AnOldBiker liked this post
  11. Top Of Page | #7
    lcarrasco's Avatar

    User Info Menu

    Re: -24 offset?

    0 offset would be an extra half inch out


  12. Likes AnOldBiker liked this post
  13. Top Of Page | #8
    Champs 6.7's Avatar

    User Info Menu

    Re: -24 offset?

    Yeah I hear ya, I just switched to an android from mac. So with what I have right now there is zero rubbing and I have full turn radius. So to mimick that I should look for a zero offset to eliminate rubbing?

    Sent from my SM-G935V using Tapatalk


  14. Top Of Page | #9
    lcarrasco's Avatar

    User Info Menu

    Re: -24 offset?

    0 offset should be very close to what you have with spacers. And if there is rubbing, it'll only be minimal trimming


  15. Likes Champs 6.7, Power247 liked this post
  16. Top Of Page | #10
    Champs 6.7's Avatar

    User Info Menu

    Re: -24 offset?

    Awesome man, I appreciate it.

    Sent from my SM-G935V using Tapatalk


  17. Likes lcarrasco liked this post
Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •