gliche on the RP psi read out

[SeveredCummins14]

Has anyone heard if there is going to be an update to fix some of the minor glitches on the ultra? I already have the latest update, but there still needs to be work done. With the key in the ON position my rail pressure numbers are showing in the millions and are jumping erratically. When I start the truck that stops, but my max still is reading that crazy number. I have to click on that parameter and exit back out and it resets those max numbers. It not hurting anything but it gets old when you have to do this just about everytime you start he truck. I saw on another post that there were others having this exact same thing happening.

Happened to me this morning for the first time...has this been addressed any further?

Sent from my SAMSUNG-SM-G900A using Tapatalk

 0 Comment(s)

[Cummins7]

Happened to me this morning for the first time...has this been addressed any further?

Sent from my SAMSUNG-SM-G900A using Tapatalk

Are you running the latest update from RaceMe? 12-14-2016 is the last update

Sent from my SM-G935V using Tapatalk

 0 Comment(s)

[F350Cummins]

mine does that only when it sits with the key in the on position not running. If it is running everything works as it should.

 0 Comment(s)

[SeveredCummins14]

Are you running the latest update from RaceMe? 12-14-2016 is the last update

Sent from my SM-G935V using Tapatalk

No. Still running the 11-28. Hopefully update this weekend though. Thanks.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 0 Comment(s)

[SeveredCummins14]

mine does that only when it sits with the key in the on position not running. If it is running everything works as it should.

Ok. Good to know. Thanks for the reply.

Sent from my SAMSUNG-SM-G900A using Tapatalk

 0 Comment(s)