RaceME Ultra Trans Tuning 68RFE?

[Crewcabcourtney]

If mine had always done it it wouldn't be so bothersome, but unfortunately I previously had nice firm shifts with Ray's tuning and then it went away when Raceme made some changes to firmware i believe, so I know what I'm missing.

Sent from my SM-G935U using Tapatalk

Why not roll back the firmware?


Sent from my iPhone using Tapatalk

 0 Comment(s)

[Thake618]

I have rays tuning as well

Sent from my SM-G935V using Tapatalk

 0 Comment(s)

[Crewcabcourtney]

I have rays tuning as well

Sent from my SM-G935V using Tapatalk

Sent from my iPhone using Tapatalk

 0 Comment(s)

[Thake618]

I'll have to talk to him. I guess that's the part where I get confused has to when the converter should be locked and not I don't know if there is a function on the tuner that tells you that

Sent from my SM-G935V using Tapatalk

 0 Comment(s)

[RATLIN'HP]

You can monitor torque converter slip. When that number is around 0 or slightly negative, it's locked. If this is what your asking.

 0 Comment(s)

[TH-64]

You can monitor torque converter slip. When that number is around 0 or slightly negative, it's locked. If this is what your asking.

It would be cool if it had a TC lockup icon like H&S has. hint, hint @Franz

Sent from my XT1080 using Tapatalk

 0 Comment(s)

[Thake618]

@RATLIN'HP I assumed that. When I shift it seems to run up between 600 and 900 at like 40 percent throttle

Sent from my SM-G935V using Tapatalk

 0 Comment(s)

[Crewcabcourtney]

Here is a video I made today coming home from work. The trans was just installed and is still in the learn process. I'm using the 30hp tune from raceme with aftermarket transmission turned on so I kept the throttle input pretty mild.

Truck is deleted with 34" tires.
Trans is a revmax 550 with billet flexplate, billet input shaft and triple disk torque converter.



Let me know what you think.






Sent from my iPhone using Tapatalk

 0 Comment(s)

[Noneck]

Why not roll back the firmware?


Sent from my iPhone using Tapatalk

My understanding is that you can't go backwards with firmware. It's a good question though .

Sent from my SM-G935U using Tapatalk

 0 Comment(s)

[Crewcabcourtney]

My understanding is that you can't go backwards with firmware. It's a good question though .

Sent from my SM-G935U using Tapatalk

I will try this weekend and let you guys know


Sent from my iPhone using Tapatalk

 0 Comment(s)