Oh yeah! I love the white grill! I'm going to get my bumpers wrapped here in a couple weeks...no more chrome!
Oh yeah! I love the white grill! I'm going to get my bumpers wrapped here in a couple weeks...no more chrome!
2006 Dodge Ram 2500 MCSB
2016 Ram 2500 CCSB *SOLD*
Beautiful dog, beautiful breed for sure, that’s all my dad would have have when I was growing up, he’s got some big paws on him already so yes he’s gonna be a big boy, woof !
"Cumminsbadgirl"
2014 Cummins Mega 3500 ( Aisin ) 4X4
MM3 Tuned by Double R Diesel
2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover
Previous "Cummins Badgirls" :
2006 Cummins 2500 4x4
2012 Cummins 2500 4x4
Wow !!! Turned out really nice !!!!! Great job
How hard labor wise to get the grill off ? Pretty simple ?
"Cumminsbadgirl"
2014 Cummins Mega 3500 ( Aisin ) 4X4
MM3 Tuned by Double R Diesel
2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover
Previous "Cummins Badgirls" :
2006 Cummins 2500 4x4
2012 Cummins 2500 4x4
Good job looks much better chrome look is so 80’s looking
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Sweet looking setup and some pretty pictures
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Grill is super simple to remove. U have to take off the black plastic top cover by prying the 4 plastic rivets out and there are 4 10mm bolts under that, that hold the grill on. 5 minute job.
Sent from my SM-G935U using Tapatalk
2013 Laramie 2500 CC. Warp tuning on RaceMe. 2 inch level w/35s.
There are some clips on the lower half that you want to be gentle with because apparently they break easily...
2015 Ram 2500 with a majestic 6.7 Cummins and 68RFE. Fully deleted with MM3 and tunes from DoubleRDiesel. 5" Flo-Pro exhaust. S&B cold air intake. Custom sound system by Me. Proud American.
Mine are intact but don't hold anything.
Sent from my SM-G935U using Tapatalk
2013 Laramie 2500 CC. Warp tuning on RaceMe. 2 inch level w/35s.
THANK YOU, simple enough !
"Cumminsbadgirl"
2014 Cummins Mega 3500 ( Aisin ) 4X4
MM3 Tuned by Double R Diesel
2014 CUMMINS "BADGIRL" Laramie MC 3500 (Aisin) 4X4 MM3 Tuned by Double R Diesel *** EGR delete AFE CAI 4” FLO-PRO w/muffler 4" Zone lift, Federal Couragia 37’s with Black Rhinos,bed carpet kit, tail-gate assist, Retrax tunnau cover
Previous "Cummins Badgirls" :
2006 Cummins 2500 4x4
2012 Cummins 2500 4x4
Just about finished my EGR delete kit. Had a good bit of coolant fall out so I’ve got a bottle of Mopar 10 year here after it’s cycled a couple times.
9BEEE6E8-018B-4716-B397-E6460F8D3EDC.jpg
This bolt proved to be hardest for me
22514D7C-C46D-44F2-A000-3F11F6479E1A.jpg
Front right on the cooler with the mark on it. The 16’s seem to have a sensor that i hadn’t seen before for the CCV breather so i wasn’t able to get down on the bolt with a socket, even when trying to use a swivel.
The 2 15mm bolts at the back of the cooler were absolutely no headache at all. I just used a short 15mm socket and a 3inch extension.
I also found that, contrary to the Sinister Diesel kit’s detailed instructions, the cooler body needs to be removed before you can get to the second 15mm bolt on the exhaust crossover elbow.
For intake removal, i just removed the filter cover, and the next 2 tubes that connect to that. I did not take the intake tube that connects to the face of the turbo off and that was plenty of room.
2006 Dodge Ram 2500 MCSB
2016 Ram 2500 CCSB *SOLD*
Bookmarks