Thanks: 5
Likes: 0
I have a 07 2500 with a leveling kit. I'm looking at new wheels and tires. I'm looking at the dick cepek torque wheels. The 17x8.5 with the bolt pattern of 8x6.5 and a +06 mm offset. The load capacity is 3640. Will these work with 35's or 315/70/17? The heaviest thing I have towed is around 7-8K lbs, will these be ok for the weight?
If you're looking at new wheels and tires, why not talk to the vendor we have as a sponsor. I forget his name.But he's in the vendors list. Offset something. He's always posting some pretty cool options
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
IGOTACUMMINS thanked for this post
Sounds good. I will give him a chance to see the post then contact him.
@CustomOffsetsOriginally Posted by uscg4x4
Yes that setup will absolutely work out. Here is a similar load rating wheel at 3500lbs and even bigger tires, 37" so your combo will work well also.
https://www.customwheeloffset.com/wh...-6-custom-rims
here is the link to that wheel, just choose the tire you like to see a package price shipped to your door!
https://www.customwheeloffset.com/bu...eight_from=315
Make sure to like us on Facebook!
Want a good daily dose of custom trucks? Check our Instagram!
We sell wheels& tires, lift kits, custom lighting, grills, light bars and more! Right Here!
IGOTACUMMINS thanked for this post
Thanks for the info. Doing my homework for when tax time comes.
IGOTACUMMINS thanked for this post
Thanks JJ It's not the drugs it's the cough syrup. Someday the fog will clear. Probably when you see me written up in the paper under obits. LOL
At least I remembered offset. . . .
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
IGOTACUMMINS thanked for this post
@CustomOffsets. Can I fit the general grabber 35x12.5x17 on my stock wheels of a 07 2500 with a leveling kit? Might need tires before I can afford wheels and tires. I have read many reviews and they seem like good tires for the price.
Yah I believe your stock wheels are 8" wide and lots of guys/gals are running 35/12.5 on 8" wide rims, here is a Dodge https://www.customwheeloffset.com/wh...-3-custom-rims
and here are all of the ones running 8" wide and 35x12.5 https://www.customwheeloffset.com/wh...e_height_to=35
Make sure to like us on Facebook!
Want a good daily dose of custom trucks? Check our Instagram!
We sell wheels& tires, lift kits, custom lighting, grills, light bars and more! Right Here!
IGOTACUMMINS thanked for this post
You'll have to do a bit of trimming to the inner fender with stock rims. Custom offsets is correct, they are 17x8's I had no problems at all with 35x12.5r17 on my 09 leveled and factory rims. Like I said, just a bit of trimming on the plastic splash gaurd.
Posting Permissions
Register To Reply
Bookmarks