I looked at that too. It actually had a lower temp rating than the Rust-Oleum..
I looked at that too. It actually had a lower temp rating than the Rust-Oleum..
Todd
2014 Ram 2500 Crew Cab 6.7 68RFE | Deleted and Tuned by Double R Diesel |
KBS makes exhaust paint. It comes in several colors too. They even have a high temp primer. I did the manifolds on my 62 with their white. It didn't erode like the previous sprays did.
https://www.kbs-coatings.com/high-te...re-paints.html
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
exactly what I was going to say
Painted the exhaust pipe yesterday.
Todd
2014 Ram 2500 Crew Cab 6.7 68RFE | Deleted and Tuned by Double R Diesel |
That came out good! Need to do mine now. What did you end up using?
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
Nice job looks good
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Looks really good. What paint? Did you end up taking that section of pipe off the truck to paint?
Got some paint from Lowes today and decided to try it out. The hardest part of the whole thing was getting the stock rubber exhaust hanger off!
Here is the before:
And here is the before with the black tip to show the contrast:
Started off cleaning everything up with soap, water, then alcohol and did a little priming. After spraying with the flat black I wanted to match the tip a little closer so I grabbed some of the semi-gloss "Ultra" rated for 1200F.
And finally:
Here were the paints for those interested:
That came out really nice. Good job!
Greg
2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
That looks great. I didn’t pull the pipe off the truck....taped off the tip and used cardboard to block any overspray.
Nice work!
Todd
2014 Ram 2500 Crew Cab 6.7 68RFE | Deleted and Tuned by Double R Diesel |
Bookmarks