Thanks: 15
Likes: 20
New to the forum looking forward to all the helpful feedback.
I just ordered the raceme tuner from Franz I have a couple ?'s
1. Does sw0 support the deletes
2. Those that have this tuner how do you like it I didn't get the pro or ultra I have the edge insight cts2 for gauges I just wanted something to do deletes and I don't need more power
3. Any other mods might I need when installing this tuner
IGOTACUMMINS thanked for this post
@Double R Diesel may chime in and answer some of that.
2014 3500 (DRW) 68RFE 3:73s . mirror light mod. 20% tint front 5% tint on rear. cattleman front bumper,running boards and headache rack. puddle light mod with blue leds. RGB lights in footwells and grill. Mostly debadged. 52" light bar and a 20" on the bumper. Smoked tail,cab and side marker lights. Black bezel headlights. Led lights where possible. 37 trail Graps. 2.5 inch leveling kit. Steering box brace. Dual steering stabilizers. MM3 and "WARPED" by Double R Diesel!
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
Honestly I have never pushed a button on anything RaceME, other than an Ultra. The other RaceME tuners do the job quite well, they just don't tune anything newer than a 2012.
SW0 is stock power and timing with deletes.
An Edge insight works well with the older RaceME tuners as a display.
Forum member @Power247 has experience with one. Maybe he will chime in.
Ray
Double R Diesel, LLC
www.doublerdiesel.com
info@doublerdiesel.com
The Cummins Whisperer!John 3:16, Romans 10:9-10...Tuning for the Heart and Soul.
I ran the RaceME Jr on my '12 2500 for about a year using Edge Insight for gauges. Excellent combo. I only switched so I could get custom engine and trans tuning from @Double R Diesel. The tuner kept the truck running clean and netted 3-4 mpg increase over stock. I ran SW2 most days and switched down to SW1 when pulling the camper.
It is a delete only tuner so yes, even on SW0 you must remove at least the NOx and DPF canisters before driving any distance after tuning. I used just a Flo~Pro delete pipe (keeps down pipe from turbo and muffler) so it would still be relatively simple to return to stock if needed. RaceME will disable the EGR so you don't have to remove unless you want to.
Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
Thanks for the quick replies, and not bashing me for buying the raceme.
You'll never get bashed here. Never 👍Originally Posted by fish32
👉Ask us how to become a Lifetime Platinum Member today!👈
You're welcome. No reason to bash anyway. It's a good tuner for what it does. Not a lot of bells and whistles but handles deletes just fine.
Greg
2012 | 2500 | CCSB | Custom MCC by Double R Diesel
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
Never bashed here and always helpful, I told you could get the answers you needed here. Welcome to the forum
Sent from my iPhone using Tapatalk
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
Welcome and good luck I have raceme ultra and love it
2015 2500 CCSW Outdoorsman black badging, ram matts black steps, XD Crank 801's with 35/12.50/18 Toyo MT's, tinted widows, BDS 2" leveling kit with shocks race me ultra, flo pro 5" turbo back exhaust
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
thanks TX
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
Posting Permissions
Register To Reply
Bookmarks