Thanks Thanks:  0
Likes Likes:  12
Results 1 to 7 of 7

Thread: boring stock 2010 Ram 2500 with 2014 Laramie wheels *HELP*

  1. Top Of Page | #1
    brentbrennan's Avatar

    User Info Menu

    boring stock 2010 Ram 2500 with 2014 Laramie wheels *HELP*

    I have a boring 2010 Ram 2500 ST 4x4 and I acquired a complete set (free) of 2014 Laramie 20" tires and wheels. They fit and look good on this rig but... At full turn the front tires rub on what I call an upper control arm or some sort of suspension component that hooks to the top of the axle and goes straight back to the frame. What can I do about this? I've considered welding some nuts on the locks to prevent them from turning so sharp... Is there a fix for this other than going back to stock tires/wheels?


  2. Likes watersupply189 liked this post
  3. Top Of Page | #2
    TexNeck's Avatar

    User Info Menu

    Re: boring stock 2010 Ram 2500 with 2014 Laramie wheels *HELP*

    Quote Originally Posted by brentbrennan View Post
    I have a boring 2010 Ram 2500 ST 4x4 and I acquired a complete set (free) of 2014 Laramie 20" tires and wheels. They fit and look good on this rig but... At full turn the front tires rub on what I call an upper control arm or some sort of suspension component that hooks to the top of the axle and goes straight back to the frame. What can I do about this? I've considered welding some nuts on the locks to prevent them from turning so sharp... Is there a fix for this other than going back to stock tires/wheels?
    If it were me I would drive around it- I get some kissing with my truck on 35s at full lock.

    Option 2 - hit up Clayton with Dudes diesel performance and have him get you some other control arms. They should make some that will clear.

    option 3- back to stock...boring you said it not me!

    2013 Ram 2500
    John 3:16 - Philippians 4:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    mike@ddpmotorsports.com
    www.ddpmotorsports.com



  4. Top Of Page | #3
    No Vacancy Power247's Avatar

    User Info Menu

    Re: boring stock 2010 Ram 2500 with 2014 Laramie wheels *HELP*

    All that @TexNeck said plus

    Option 4 - change tires to something smaller and/or narrower

    Greg
    2012 | RAM 2500 | CCSB | MM3 tuned by Double R Diesel
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  5. Likes walla2k5, watersupply189 liked this post
  6. Top Of Page | #4
    MOD watersupply189's Avatar

    User Info Menu

    Re: boring stock 2010 Ram 2500 with 2014 Laramie wheels *HELP*

    Agreed what they said ! ^^^^^^^


    2016 Ram Laramie 3500, G56, 6.7, MM3 by Double R Diesel, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more!

    2016 RAM 3500 4x4 Laramie Crew Cab
    Cummins,G56, Rough Country level, Morimoto LED fog lights, LED headlights, Lund Attitude Steps sprayed with Line-X, DRL's Activated, 35x12.50R18 Falken Wildpeak ATW3, Fuel Vapor Wheels Matte Black w/Dark Tint, A.R.E. Truck cap and swing boxes

  7. Likes Power247 liked this post
  8. Top Of Page | #5
    TexNeck's Avatar

    User Info Menu

    Re: boring stock 2010 Ram 2500 with 2014 Laramie wheels *HELP*

    Quote Originally Posted by Power247 View Post
    All that @TexNeck said plus

    Option 4 - change tires to something smaller and/or narrower

    Greg
    2012 | RAM 2500 | CCSB | MM3 tuned by Double R Diesel
    2016 | Heartland Pioneer | DS310
    good call here- I am guessing you could upgrade control arms cheaper than tires u less you can find some used. Adds up quick with dismount then mounting and balancing!

    2013 Ram 2500
    John 3:16 - Philippians 4:13

    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email me at:
    mike@ddpmotorsports.com
    www.ddpmotorsports.com



  9. Likes watersupply189, Power247 liked this post
  10. Top Of Page | #6
    DDP's Avatar

    User Info Menu

    Re: boring stock 2010 Ram 2500 with 2014 Laramie wheels *HELP*

    Quote Originally Posted by brentbrennan View Post
    I have a boring 2010 Ram 2500 ST 4x4 and I acquired a complete set (free) of 2014 Laramie 20" tires and wheels. They fit and look good on this rig but... At full turn the front tires rub on what I call an upper control arm or some sort of suspension component that hooks to the top of the axle and goes straight back to the frame. What can I do about this? I've considered welding some nuts on the locks to prevent them from turning so sharp... Is there a fix for this other than going back to stock tires/wheels?
    You can also get some hub centric wheel spacers. I only recommend bora wheel spacers as they are truly hubcentric and i have used them on many of my trucks and have not had any problems out of them.

    Matthew 6:9-13, 2 Corinthians 5:20
    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email us at:
    sales@ddpmotorsports.com
    www.ddpmotorsports.com


  11. Likes watersupply189 liked this post
  12. Top Of Page | #7
    DDP's Avatar

    User Info Menu

    Re: boring stock 2010 Ram 2500 with 2014 Laramie wheels *HELP*

    Quote Originally Posted by TexNeck View Post
    If it were me I would drive around it- I get some kissing with my truck on 35s at full lock.

    Option 2 - hit up Clayton with Dudes diesel performance and have him get you some other control arms. They should make some that will clear.

    option 3- back to stock...boring you said it not me!
    Thanks for the mention my man!

    Matthew 6:9-13, 2 Corinthians 5:20
    See what we are up to on:
    FACEBOOK | INSTAGRAM
    Or Email us at:
    sales@ddpmotorsports.com
    www.ddpmotorsports.com


  13. Likes watersupply189 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •