Anyone try this combo? How much did it rub? Truck is a 3500 with Factory rear airbags sits nearly level so I dont want to do a leveling kit unless I do a rear block of the same height and nobody makes a kit.
Anyone try this combo? How much did it rub? Truck is a 3500 with Factory rear airbags sits nearly level so I dont want to do a leveling kit unless I do a rear block of the same height and nobody makes a kit.
Its going to be tight up front. I'm running a 20x9 +20 and had to pull back the fender liner to keep from rubbing the trailing edge of the tire at full lock.
Greg
2012 | RAM 2500 | CCSB | MM3 tuned by Double R Diesel
2016 | Heartland Pioneer | DS310
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
Let's ask @Custom Offsets!
I have looked Custom Offsets site high and low what an excellent resource but I didn’t see a whole lot of stock suspension with +1 Offset and 35” tires. I am not against running a +18 or +20 but I really like the Fuel Flow 8 and they don’t make them in a +20 for our bolt pattern like they do for the other Brands.
Check our gallery out for fitment on 20x9's on stock height Ram 2500's - https://bit.ly/2yXMyoG
Make sure to like us on Facebook!
Want a good daily dose of custom trucks? Check our Instagram!
We sell wheels& tires, lift kits, custom lighting, grills, light bars and more! Right Here!
Bookmarks