Have a 1.75” level on my 2018 ram and put on some 325/60/20 and now have a little rub on sway bar and radius arm but none on the inner fender plastic. Any thoughts on running a 1/4” spacer?
Sent from my iPhone using Tapatalk
Have a 1.75” level on my 2018 ram and put on some 325/60/20 and now have a little rub on sway bar and radius arm but none on the inner fender plastic. Any thoughts on running a 1/4” spacer?
Sent from my iPhone using Tapatalk
Hey bud if you go spacers make sure and get hub centric. I use bora wheel spacers.
Matthew 6:9-13, 2 Corinthians 5:20
See what we are up to on:
FACEBOOK | INSTAGRAM
Or Email us at:
sales@ddpmotorsports.com
www.ddpmotorsports.com
Couldn’t find any that said specifically that they’re were hub centric because they’re only 1/4” but the hub bore is 126 so it should be close.
Sent from my iPhone using Tapatalk
Lift kits again
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
And that means?
Sent from my iPhone using Tapatalk
These guys will tell you I am against lift kits. They almost always cause other problems. Cool looking isn't practical in many ways
Ahh I see. You're a new guy so you don't know me.. . . Yet I solve allot of problems around here. Not all. I've been busy which is why you haven't seen me yet
2003- 3500 RWD Automatic. S & B intake, BD Intercooler, Pusher Air Horn, MM3 Double R Tuning, Turbo Timer, electric Flex-a-lite fans, FASS 95, 50 HP tips, upgrade to 351 turbo, 3.42 gears, Twin air compressors, air bags, Remote dual oil filters, Hellwig sway bar, Front Winch. Home made Fuel Heater, BD Exhaust brake with Torque Lock. Tons of TLC
Well they sound very lucky to have someone like you with vast amounts of knowledge... but this really has nothing to with my leveling kit. It’s about offset in this case and I’m seeking people who may personally or know first hand about the use of 1/4” quality wheel spacers. If you have something to share in regards to that I’m all ears, not really looking on for a lecture on the pros and cons of lifting trucks.
Sent from my iPhone using Tapatalk
A spacer would definitely help with the rubbing on the sway bar! Shoot us an email to info@customoffsets.com we sell Bora, hubcentric spacers!
Make sure to like us on Facebook!
Want a good daily dose of custom trucks? Check our Instagram!
We sell wheels& tires, lift kits, custom lighting, grills, light bars and more! Right Here!
Thanks for the suggestion! Unfortunately not looking for anything more than 1/4” though, if I’m right bora doesn’t offer that, correct?
Sent from my iPhone using Tapatalk
Yes they do!
Make sure to like us on Facebook!
Want a good daily dose of custom trucks? Check our Instagram!
We sell wheels& tires, lift kits, custom lighting, grills, light bars and more! Right Here!
Bookmarks