Thanks Thanks:  5
Likes Likes:  41
Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: A couple questions about deleting

  1. Top Of Page | #21
    BrentM's Avatar

    User Info Menu

    Re: A couple questions about deleting

    If you don't want it to be too loud in the cab when you do the exhaust get the muffler. I have run both starting with the straight pipe and adding the muffler. On my 2017 there are no wires in the downpipe, There are alot from there back, Ray has a plug kit to cap them all off if you want to keep them clean. I did a video with and without the muffler



    Brent
    2017 Ram 2500 Limited / 6.7 / 68RFE / BDS 8" Lift / 38 x 13.5 Trail Grapplers / 20 x 10 Hostile Wheels
    2020 Ram 2500 Tradesman / 6.7 / 68RFE
    1993 W250 LE / 5.9 12V / G360 - 5 Speed


  2. Thanks watersupply189 thanked for this post
    Likes Md Jeff, watersupply189, walla2k5 liked this post
  3. Top Of Page | #22
    Md Jeff's Avatar

    User Info Menu

    Re: A couple questions about deleting

    Thx Brent, going with a muffler...wife had planned to get the exhaust for Christmas for me and I told her to wait because I wasn't sure what I was gonna do, sent my wish list to her this morning, added a CAI intake too!


  4. Thanks IGOTACUMMINS thanked for this post
  5. Top Of Page | #23
    walla2k5's Avatar

    User Info Menu

    Re: A couple questions about deleting

    Quote Originally Posted by Md Jeff View Post
    Want to thank everyone for the insight, I probably made it more complicated than what it actually was by over thinking it .... I ordered the MM3 Lite from Ray so it won't be long now.
    Awesome! Like @FarmerJohn104 stated, watch lot's of You Tube videos. Double R diesel has quite a few about his products, a few with some important cautions about the power his tunes build.

    2013 Ram 2500 Big Horn 4x4 G56 CCLB 6.7, MM3 Tuned by Double R Diesel, Flo-Pro 4" Exhaust, Deviant Race Parts Goodies, ARP Head Studs, South Bend Clutch, 3" Thuren Front Springs w/Fox Shocks All-Around, Hell-Bent Steel Steering Box Brace, Thuren Track Bar, Air-Lift 5000, Deviant Race Parts 70" Traction Bars, Falken Wild-Peak AT3W LT285/75R18 (34.8x11.3x18) on Moto Metal MO970 18x9 +18mm

  6. Top Of Page | #24
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: A couple questions about deleting

    Quote Originally Posted by BrentM View Post
    If you don't want it to be too loud in the cab when you do the exhaust get the muffler. I have run both starting with the straight pipe and adding the muffler. On my 2017 there are no wires in the downpipe, There are alot from there back, Ray has a plug kit to cap them all off if you want to keep them clean. I did a video with and without the muffler

    Very nice setup like both

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •