Leveling kit

[Radarlover]

What's a good leveling kit for my truck?

I need the fronts and front/rear.

What do I need?

I just want the front to match the rear.

 0 Comment(s)

[IGOTACUMMINS]

@Dude's Diesel Performance can help you friend.

 0 Comment(s)

[skiwaves13]

In my experience you get what you pay for!

I have had good luck with King and Icon.

 0 Comment(s)

[TexNeck]

Clayton will get you handled from DDP as mentioned

Measure from top of your rear wheel to fender (middle) and do the same with the front. Subtract front from rear. That’s your variance.

With my experience it’ll settle a bit meaning a 2.5” is more like a 2” and 2” is less.

I have a 2.5” on mine with aftermarket shocks (zone) I have bilstein 5100s ready to go in - longer shocks aren't required but won’t hurt.

 0 Comment(s)

[DDP]

Thank you both for the mention! Very much appreciated! Love you guys!

Yes, sir, I’ll be more than happy to help ya out.

I’ll shoot you a message and I apologize for the delay.

 0 Comment(s)

[KeepEmRollin14]

What's a good leveling kit for my truck?

I need the fronts and front/rear.

What do I need?

I just want the front to match the rear.

I just ordered the Bilstein leveling kit to do this exact thing on an 18’ Ram 2500. It is a lengthened spring and bilstein 5100s, i previously had spacers on a 2014 Laramie and it was junk. I didnt like the setup at all which is why I went with springs this time. Bilstein in my opinion is pretty decent, unless your doing some major offroading you dont need KING or FOX shocks, yes they are valved to the specs that Carli and Thuren ask for but like I said unless your taking it offroad pretty seriously its overkill. Same goes for reservoir shocks, overkill for pavement driving. Also keep in mind King shocks are known to weep until broken in. I would recommend an adjustable track bar to recenter your axle. As you go up your axle is going to want to shift to one side as it travels through the arc of the track bar. You can pick and choose what brand. My Bilstein kit ran me around $400 shipped to my door. Kit number BIL46-241641. Im sure DDP or another vendor will get you squared away. Also I’d recommend having you alignment set to Thuren fab specs as this should yield the best wear on tires. All this just my .02cents. Good luck.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[DIESELWRKS]

What's a good leveling kit for my truck?

I need the fronts and front/rear.

What do I need?

I just want the front to match the rear.

What year is your truck?

 0 Comment(s)

[KeepEmRollin14]

What's a good leveling kit for my truck?

I need the fronts and front/rear.

What do I need?

I just want the front to match the rear.

I had a spacer kit with shock extension brackets on my 14’ which was 2.75” in front nothing in the rear. Doing a level now on my 18’ Big Horn I chose the Bilstein kit as mentioned previous comment. You shouldn't have to touch the rear with a level and be able to clear 35” tires.

2014 Laramie Leveled



2018 Big Horn stock



I’d recommend whoever you go with to get a little nicer kit with extended shocks like Bilstein 5100/5160s upfront and lengthened springs instead of spacers. I'll actually be taking my factory Bilstein 4600 shocks with 2500 miles on them off.

I'm also making videos for each install on my YouTube channel yall can check out if interested.

https://www.youtube.com/channel/UCUa...3xLRZeEXF06wkw


Sent from my iPhone using Tapatalk

 0 Comment(s)