@Polaraco ... Yep ... your right oldman !
As for the resistors with the LEDs. I'd just do a little check to see if your truck needs them or not. Why add more stuff if not needed ? And would it cause problems down line if they are not needed ?
@Polaraco ... Yep ... your right oldman !
As for the resistors with the LEDs. I'd just do a little check to see if your truck needs them or not. Why add more stuff if not needed ? And would it cause problems down line if they are not needed ?
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
True. Haha hopefully get them in this week. Waiting on a grill to come in that way I can do it all at once. But I'll say 9005s in the fog lights are nice and bright. I can literally drive at night with only those.
2014 3500 (DRW) 68RFE 3:73s . mirror light mod. 20% tint front 5% tint on rear. cattleman front bumper,running boards and headache rack. puddle light mod with blue leds. RGB lights in footwells and grill. Mostly debadged. 52" light bar and a 20" on the bumper. Smoked tail,cab and side marker lights. Black bezel headlights. Led lights where possible. 37 trail Graps. 2.5 inch leveling kit. Steering box brace. Dual steering stabilizers. MM3 and "WARPED" by Double R Diesel!
There is a BIG difference from the stock bulbs.
The wife noticed on the 1st trip and had to have them on hers.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
Lot of difference @theaaronbush
2014 3500 (DRW) 68RFE 3:73s . mirror light mod. 20% tint front 5% tint on rear. cattleman front bumper,running boards and headache rack. puddle light mod with blue leds. RGB lights in footwells and grill. Mostly debadged. 52" light bar and a 20" on the bumper. Smoked tail,cab and side marker lights. Black bezel headlights. Led lights where possible. 37 trail Graps. 2.5 inch leveling kit. Steering box brace. Dual steering stabilizers. MM3 and "WARPED" by Double R Diesel!
I had an oldman approach me at a fill station telling me my lights are to bright. I asked if I was behind him at the time and he said yes, there to bright. I asked if they were shining in his mirrors blinding him, his responce was no. After talking to him, I figured he wasn't use to LED's. He finaly figured out they were aligned right, not blinding anyone and are legal for the road. He was just to use to the yellow dim lights that are stock.
Last we said to each other, he was gonna see into maybe getting a set to see better at night.
Won another over to 'The Bright Side'.
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
I'm gonna go tonight and check them. I let them down 5 complete turns already because I could tell they were a bit high. My fogs are turned all the way down as far as they will go and now seem about right to me. I will say that if I had it to do over I would not done the high beams. To me there is not enough clearance even though the dust cap fit back on. No more than I'll use them I can at least say I have them LOL and they all match color now.
2014 3500 (DRW) 68RFE 3:73s . mirror light mod. 20% tint front 5% tint on rear. cattleman front bumper,running boards and headache rack. puddle light mod with blue leds. RGB lights in footwells and grill. Mostly debadged. 52" light bar and a 20" on the bumper. Smoked tail,cab and side marker lights. Black bezel headlights. Led lights where possible. 37 trail Graps. 2.5 inch leveling kit. Steering box brace. Dual steering stabilizers. MM3 and "WARPED" by Double R Diesel!
I agree!!!!
Sent from my iPhone using Tapatalk
I think he meant putting the can or bottle 'IN' the ice to cool.
Ya gotta give us Old Coots a break ... we know what we meant to say !
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
ok i want to go to led as well but is the dust cover needed because the fan on those thing is not small at all and has any one got the high beams to fit with the fan type because i can't get them in the hight beams in projector headlights
2015 ram 2500 Laramie amp steps line x the box 18" outlaw wheels bfg rigid terrain tires raceme ultra sinister egr delete flopro pipe
I don't think they fit in projector housings with the covers. Mine were regular quad lights. High beam was tight fit with the cover. I don't think I'll ever truly need them though.
2014 3500 (DRW) 68RFE 3:73s . mirror light mod. 20% tint front 5% tint on rear. cattleman front bumper,running boards and headache rack. puddle light mod with blue leds. RGB lights in footwells and grill. Mostly debadged. 52" light bar and a 20" on the bumper. Smoked tail,cab and side marker lights. Black bezel headlights. Led lights where possible. 37 trail Graps. 2.5 inch leveling kit. Steering box brace. Dual steering stabilizers. MM3 and "WARPED" by Double R Diesel!
Bookmarks