Thanks: 5
Likes: 6
Hello All,
My CTS has a indicator for Regen and has the Regeneration Status PID, but it doesn't appear to exist on the MM3.
I have done some searching without success - can anyone suggest how to monitor Regeneration Status with the MM3?
Appreciate it.
2012 RAM CTD G56
Hopefully this this is the correct section - otherwise please delete / move
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
The MM3 doesn't have that as an option yet. I've asked CJ at MM3 Power to see if the firmware folks could add more gauge parameters to monitor associated with the DPF.Originally Posted by DieselJack
Ray
Double R Diesel, LLC
www.doublerdiesel.com
The Cummins Whisperer!John 3:16, Romans 10:9-10...Tuning for the Heart and Soul.
IGOTACUMMINS liked this post
Once again Ray is the answer man
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
IGOTACUMMINS thanked for this post
IGOTACUMMINS liked this post
Thanks
Any thoughts on maybe watching one of the 4 egt PIDs (#4?) to give me an idea of when it's happening via high temps?
IGOTACUMMINS thanked for this post
I found a few threads on this subject on the web and it seems to be the case that when egt3 exceeds 800 degrees (typically 1000) that indicates Regen is occurring. I will try to confirm that.
HKBIGDADDYDIESELDAN liked this post
Look under Advalues for DeSoot.
Posting Permissions
Register To Reply
Bookmarks