Thanks Thanks:  9
Likes Likes:  30
Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: Ultra + TC Slipping

  1. Top Of Page | #1
    BigRed14's Avatar

    User Info Menu

    Ultra + TC Slipping

    Happy belated Thanksgiving all. My apologies if there's already a related thread but I've been reading for almost an hour now, haven't come up with a whole lot, became platinum member and about to get warp from Ray. Here's the skinny....
    -2014 3500 with 69k, fully deleted, 5" flo-pro with muff, and RaceMe Ultra
    -burned out OD clutches in trans less than 5k miles ago so I had a local shop build it up
    -precision tc w/ 3000 rpm stall, 45rfe-hd2, rfe-lb1, and other work (waiting for exact list of part numbers)
    -on my way to upstate ny to go salmon fishing and I was driving up hill going 65mph and went to pass a guy and truck started to buck and immediately knew it was the tc
    -brought back to trans shop and they replaced the tc
    -reflashed and drove like old lady during re-learn and tc is still slipping but not violently like before


    Of course the trans guy is now pointing at the tuner but isn't being a dick and will resolve the issue if determined that trans is problem. I'm not entertaining the idea of going back to stock just so trans guy has nobody to point finger at just yet. I have warp tuning from Ray in my cart at DRD, with t-shirt and stickers of course, and I'm hoping that might resolve the issue.


    I have become very frustrated and wish I had just put the 4k spent on the rebuild towards a suncoast trans and just been done with it. Looking to the community to hopefully point me in the right direction. Thanks


  2. Likes david3gen liked this post
  3. Top Of Page | #2
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    What HP level are you running on the RaceME Ultra?

    "The grass is greener where you water it"


  4. Top Of Page | #3
    BigRed14's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    120 with mild spool. Slips even at stock with deletes


  5. Top Of Page | #4
    WE WILL STAND! IGOTACUMMINS's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    Quote Originally Posted by BigRed14 View Post
    120 with mild spool. Slips even at stock with deletes
    Thanks not right.

    @Double R Diesel thoughts?

    "The grass is greener where you water it"


  6. Top Of Page | #5
    BigRed14's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    Havent run it at stock with deletes since i did the relearn so i will try that today and confirm. Thanks for the replies

    Sent from my SM-G930V using Tapatalk


  7. Top Of Page | #6
    HKBIGDADDYDIESELDAN's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    Welcome to the family

    2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
    Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs

  8. Top Of Page | #7
    MOD watersupply189's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    Welcome friend


    2016 Ram 3500 4x4 Laramie Cummins, G56, Rough Country Leveling, MM3 EGRless Tuned by Double R Diesel

    2016 RAM 3500 4x4 Laramie Crew Cab
    Cummins,G56, Rough Country level, Morimoto LED fog lights, LED headlights, Lund Attitude Steps sprayed with Line-X, DRL's Activated, 35x12.50R18 Falken Wildpeak ATW3, Fuel Vapor Wheels Matte Black w/Dark Tint, A.R.E. Truck cap and swing boxes

  9. Top Of Page | #8
    No Vacancy Power247's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    Welcome!!

    Greg
    2012 | RAM 2500 | CCSB | Custom tuned by Double R Diesel
    2016 | Heartland Pioneer | DS310

    Greg
    2019 | RAM 2500 | CCSB | 6.4 HEMI

  10. Likes watersupply189 liked this post
  11. Top Of Page | #9
    Old... But Still Here! AnOldBiker's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    to the forum @BigRed14



    Jim


    2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17

    "Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan

  12. Likes watersupply189 liked this post
  13. Top Of Page | #10
    BigRed14's Avatar

    User Info Menu

    Re: Ultra + TC Slipping

    Ran it at 60hp and 30hp(everything else defaults) and the tq-s monitor would spike up considerably instead of it steadily bouncing around 0 in 5th and 6th. Also looks like the vehicles rpm gauge in the dash jumps a touch. I did notice the truck down shifts sooner where before it was powering through the lower rpms. A buddy of mine sold his 15 and still has his edge with attitude. Going to reflash back stock and then flash with his edge when he gets back in town. Thanks for the support and warms welcomes


Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •