So am I reading this right you can install the raceme Ultra without deleting any of the hard parts?
So am I reading this right you can install the raceme Ultra without deleting any of the hard parts?
You can leave the EGR in place. Of course the exhaust has to be changed.
Ray
Double R Diesel, LLC
www.doublerdiesel.com
info@doublerdiesel.com
I have my sinister delete kit just haven't received my Exhaust yet.
So before I remove any hard parts am I supposed to install the tuner first and run the program?
Correct. Always program your truck first before removing hard parts.
Sometimes things can happen with electronic gadgets. If it did, you wouldn't be left with a truck you couldn't drive. Once hard parts are removed, the truck must be programmed for that before it will operate.
Ray
Double R Diesel, LLC
www.doublerdiesel.com
info@doublerdiesel.com
Just to follow up on this, I plugged the EGR servo back in and it made no difference...still smokes and surges. Glad it works for some guys but I'll be going back to an old update until Franz figures this crap out. One would think this is more important than releasing custom tuning platforms, but I guess not.
Be patient is all I can say. The warp tuning will help raceme provide better updates for guys that just want box tuning. There will be many multiple tuners playing with warp and all trying different setups and styles of tuning. It will get shared around and many fixes will be done
2015 laramie 3500 CCLB G56 4x4/Thuren springs/trackbar/swaybar with King's on Walker's with 37 Toyo mt's. Raceme/Arp625's/BBI 1.5's/Stainless Diesel 467.7/Airdog 165 4g/Fleece 10mm CP3/GDP grid delete and S3/Hellman VC.....Warp by double r diesel
Does anyone know what the firmware RaceMe-0001.00.27.7z is listed on the site? Its not part of the big update which looks to be firmware 26. Thanks.
Sold. 1999 2500 24v auto. 53 block casualty. Edge comp, 5" exhaust, intake, leveled on 37s
Sold. 1992 2500 reg cab 5 speed. pods, sb clutch, terrible paintjob
Sold. 2004 3500 single wheel ccsb. udc tuned smarty, G56 swapped from auto, dual disc valair, ladder bars, 2nd gen swapped manifold, super b special, arp studded, 33% pump, 60hp injectors and bunch of other stuff that I forgot about.
Franz said this was a firmware update mainly for the 2012 year models: If you have already the "M" release I recommend to use the 1.0.27 on your 2012 truck.We had some 2012 trucks getting a VER mismatch and this is the cure for that.
Thanks for reminding me to check thier website i havent been in a while!
What are yall using to convert jpeg to bmp for the background on apple computers?
I just right clicked the file, clicked "Get Info" and changed the extension from ".JPG" to ".BMP". It'll ask if you really want to change it, click "Yes", and it'll be done. Worked for me anyways... I couldn't find any option in Preview or any other apps to export as .BMP.
Bookmarks