What size would it be to take these lug nuts off? 22mm deep well? When I bought the truck it didn’t have the socket required to take them off.
Sent from my iPhone using Tapatalk
What size would it be to take these lug nuts off? 22mm deep well? When I bought the truck it didn’t have the socket required to take them off.
Sent from my iPhone using Tapatalk
Those are a special lug nut usually found at Discount Tire. I bought a replacement from Amazon https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Are they all the same or is the internal nubs spaced differently or different spaces between them ?
With the past locking lugs I've had in the past, they were spaced differently and some with different lengths. They had a code to identify which lugs they fit, are these the same or all common ?
After thought: If your not going to keep them, what about something like this: https://www.amazon.com/slp/rounded-b...a9envgnasay73n
Jim
2006 ~ 2500HD, Big Horn Edition, 5.9, 4x4, Q/Cab, 48RE, L/B, 3.73, S&B CAI & Snout, ProFlo 5" S/S exhaust, Smarty Touch, Oil ByPass Kit, 60 gal main tank, 110 gallon in-bed tank, XX-Fuel Filter System, Coolant Bypass Kit, Mag-Hytec front & rear end covers and trans pan, 285 x 70 x 17
"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children’s children what it was once like in the United States, where men 'were' free." ~ Ronald Regan
All 8 lug nuts are the same and spaced evenly. However when you take the cap off the rim there is more lug nuts. What the heck is that about. Here is a picture of the ones behind the cap.
Sent from my iPhone using Tapatalk
Are the nuts inside the rim cap for the caliper?
Sent from my iPhone using Tapatalk
The ones behind the cap hold the axle in the housing. That's a full floating axle.
You can remove those and slide the axle out each side vs having to remove a retainer from the center section of the axle. The big hub that the bolts are threaded into is the bearing hub.
Oh alright. So the 8 lug nuts on the outside will take off just my rim and tire? I know this is a dumb question, but never seen nuts inside a cap like that before.
Sent from my iPhone using Tapatalk
You are correct. You just need to remove the 8 lug nuts to get the wheel and tire off.
Yes indeed bro those are a must have for any toolbox worth there weight in gold
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
I’ve never seen these they look interesting bud
2012 Cummins Ram 6.7L MM3 tuner full 5" Flo Pro TBE Exhaust LWBCC 4x4 Mag Hytec Double Deep Transmission Pan , Mag Hytec Rear Diff Cover
Airlift part # 57595 7500lbs airbags ,Nitto Ridge Grapplers 35/12.50/20 on XD 829 Big Hoss ll Satin Black Machined Dark Tint 20 x 9 with + 18 offset rims,MM3 Tuner With full Custom Tunes by Ray at DRD , Autometer A13117 Pillar Pod , Edge 98004 mount adapter , Mag Hytec front diff cover, SuperNova V4 LED Headlight Bulbs
Bookmarks