What Did You Do On Your Truck Today?

[4kids2dogs&RV]

Installed my new Mag-Hytec rear diff cover that I purchased through James @Rollin Smoke Diesel




New on the left, stock on the right


Look how much bigger this thing is!


Gears looked really good for 86k miles. I think this was the first time the diffs had been serviced. No chunks on the magnets!


8 quarts of this stuff... Only the best for my baby!


All done, I even took the time to dig out the torque wrench for this.

Took my time, no lift, I just crawled under and got to work.
On a scale of 1-5, 1 = easy, 5 = difficult, I'd give it a 2 only because of the factory gorilla and not having a lift.
Total install time, about 3 hours, which included taking pictures and a run to the parts store while it drained.



Sent from my iPad using Tapatalk

 0 Comment(s)

[Peter Champion]

Looks nice


2017 2500 Black Larime CCSB | AFE CAI |
4" Straight pipes |MM3 tuned by Anarchy

 0 Comment(s)

[TH-64]

Cool! Glad to see you're using the Good Stuff for lubrication. Let us know on the lab results!

Sent from my XT1080 using Tapatalk

 0 Comment(s)

[Yamaha242LS]

Installed my new Mag-Hytec rear diff cover that I purchased through James @Rollin Smoke Diesel

https://uploads.tapatalk-cdn.com/201...ec05c66d02.jpg

https://uploads.tapatalk-cdn.com/201...8c769ba3f0.jpg
New on the left, stock on the right

https://uploads.tapatalk-cdn.com/201...fbe492ab05.jpg
Look how much bigger this thing is!

https://uploads.tapatalk-cdn.com/201...ad49507be1.jpg
Gears looked really good for 86k miles. I think this was the first time the diffs had been serviced. No chunks on the magnets!

https://uploads.tapatalk-cdn.com/201...44ff71745b.jpg
8 quarts of this stuff... Only the best for my baby!

https://uploads.tapatalk-cdn.com/201...4a699c0fde.jpg
All done, I even took the time to dig out the torque wrench for this.

Took my time, no lift, I just crawled under and got to work.
On a scale of 1-5, 1 = easy, 5 = difficult, I'd give it a 2 only because of the factory gorilla and not having a lift.
Total install time, about 3 hours, which included taking pictures and a run to the parts store while it drained.



Sent from my iPad using Tapatalk

I'm about to do mine front and rear. Don't think I will get a new cover yet but do need to do gear oil. So it took 8 qts? Does the new cover add capacity or is that just what it takes to fill?

Sent from my XT1565 using Tapatalk

 0 Comment(s)

[Brendan Warhol]

Leveling kit. Installed myself. Now I have to wait till tomorrow to go get an alignment


Sent from my iPhone using Tapatalk

 0 Comment(s)

[4kids2dogs&RV]

I'm about to do mine front and rear. Don't think I will get a new cover yet but do need to do gear oil. So it took 8 qts? Does the new cover add capacity or is that just what it takes to fill?

Sent from my XT1565 using Tapatalk

Stock is 3 to 4 quarts less for the rear diff, didn't change the front cover.

 0 Comment(s)

[CSouth81]

I ordered a pile of parts from Double R Diesel if that counts....

 0 Comment(s)

[IGOTACUMMINS]

I ordered a pile of parts from Double R Diesel if that counts....

That does in our book!

🏁Join us as Lifetime Platinum Member today!🏁

 0 Comment(s)

[hoe]

Fitted a set of Dobinson +100kg front springs and Bilstein 5100 shocks.
Rides much better now.....




Sent from my LON-L29 using Tapatalk

 0 Comment(s)

[DanO]

Added BDS Recoil Traction Bars after I dislocated my differential, so we fully welded the axle tubes to differential.

 0 Comment(s)