What Did You Do On Your Truck Today?

[Jaxonsram]

What dealer is this?

The dealership has changed owners but I think if you google thunderbay Chrysler it should come up.

They are located in Alpena Michigan.

This was one of the first mods that I didn’t do myself and boy was it nerve racking but they left inside the 3nights it had to be away from me.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[Jaxonsram]

Thanks for the reply and you’re welcome

That’s awesome that they did it there at the dealership!

They told us for his Jeep that they would have to take the seats out and have them shipped to a shop to have them done and the price was ridiculous just for the front seats, not including the back seat (2 door Jeep)
I really really love how yours turned out


2014 Laramie MC 3500 (Aisin) 4X4
MM3/DRD, *** EGR Delete
AFE CAI, 4” FLO-PRO w/muffler, 4” Zone lift w/37 Federal Couragia’s/Black Rhinos

You mite check the katzkin web site and see if there’s a dealer you mite be able take your keep to, or you could just take a road trip to northern Michigan.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[BubbaJo]

Good to see a fellow Michigander on here.

 0 Comment(s)

[cumminsbadgirl]

You mite check the katzkin web site and see if there’s a dealer you mite be able take your keep to, or you could just take a road trip to northern Michigan.


Sent from my iPhone using Tapatalk

LOL and thanks I will look up their website.


2014 Laramie MC 3500 (Aisin) 4X4
MM3/DRD, *** EGR Delete
AFE CAI, 4” FLO-PRO w/muffler, 4” Zone lift w/37 Federal Couragia’s/Black Rhinos

 0 Comment(s)

[SyN]

Woke up this morning to 37*F - Took about 3.7 sec of thinking - Today is a good time to perform my Winter Oil Change!

Took her out on the highway for 14 miles @ 75 mph to get the oil up over 190*F - Parked her in the driveway and have the old oil draining through the fumoto valve as I type - will let her sit another hour or so before removing the oil filter.

Winter Oil Change ---> Pictured Below

Note: This is my last Wix XP filter - Next & Future filters will be Donaldson Blue DBL7349.

 0 Comment(s)

[flanagan]

Did some katzkin leathers this week!

So friggin awesome.

https://uploads.tapatalk-cdn.com/202...9298729e3d.jpg


Sent from my iPhone using Tapatalk

Man I really like that look.

I think I might need to start spending some money on the inside now.

Sent from my SM-G973U using Tapatalk

 0 Comment(s)

[SyN]

Getting a bit prepared for this up & coming winter - since most folks still cannot figure out how to drive in snowy or icy conditions or they have a auto that is not even close to being prepared for this type of weather.
I figured I would at least have the actual equipment installed where I could at least help pull them out of a bad situation.

I purchased the 2 1/2” CURT D-Shackle hitch last week. (Applied a bit of Red Amsoil Grease between the receiver & hitch) as well as threads on pin.
Ordered the 30’ tow strap this morning.
The Kinetic Recovery Ropes were just a bit to pricey for me at this time.

Tow Strap ordered: https://www.amazon.com/dp/B078K25FLM...v_ov_lig_dp_it

Thinking about upgrading the D-Shackle to one of these:
https://www.amazon.com/dp/B07VWQTF55...v_ov_lig_dp_it

I can't count how many times - I have come upon a family whom have slid of the road due to snowy or icy conditions and I didn't have the equipment to help pull (Not Jerk) them out.

Even might invest in a set of soft shackles - never can hurt to have a much safer solution.
https://www.amazon.com/dp/B07TDCHY2X...v_ov_lig_dp_it

My only limitation might be my OEM (Firestone) tires. (Even though they still look practically new) dropping 10psi in each might help.

 0 Comment(s)

[cumminsbadgirl]

Getting a bit prepared for this up & coming winter - since most folks still cannot figure out how to drive in snowy or icy conditions or they have a auto that is not even close to being prepared for this weather.
I figured I would at least have the actual equipment installed where I could at least help pull them out of a bad situation.

I purchased the 2 1/2” CURT D-Shackle hitch last week.
Ordered the 30’ tow strap this morning.

Tow Strap ordered: https://www.amazon.com/dp/B078K25FLM...v_ov_lig_dp_it

Thinking about upgrading the D-Shackle to one of these:
https://www.amazon.com/dp/B07VWQTF55...v_ov_lig_dp_it

I can't count how many times - I have come upon a family whom have slid of the road due to snowy or icy conditions and I didn't have the equipment to help pull (Not Jerk) them out.

Even might invest in a set of soft shackles - never can hurt to have a much safer solution.
https://www.amazon.com/dp/B07TDCHY2X...v_ov_lig_dp_it

My only limitation might be my OEM (Firestone) tires.

YOU are awesome for thinking and helping out others


2014 Laramie MC 3500 (Aisin) 4X4
MM3/DRD, *** EGR Delete
AFE CAI, 4” FLO-PRO w/muffler, 4” Zone lift w/37 Federal Couragia’s/Black Rhinos

 0 Comment(s)

[Jaxonsram]

Man I really like that look.

I think I might need to start spending some money on the inside now.

Sent from my SM-G973U using Tapatalk

This was truly one of my best mods.

I wish I had a before picture, it is so much brighter and the seats are a lot more comfortable.


Sent from my iPhone using Tapatalk

 0 Comment(s)

[BubbaJo]

I finally got around to installing my block heater cord yesterday.

My driveway sucks and at such a slant that i couldn't get my fat butt under the front of the truck.

So I had to drive up on the bank to gain enough clearance to reach up in there.

Note to self, if I ever have to do this again, don't be driving your truck 10 minutes before hand LOL.

Real close to the oil filter, which gets mighty warm after driving LOL

IMG_6348.jpg

IMG_6349.jpg

IMG_6351.jpg

 0 Comment(s)