13.025 @106.82... was really hard on my truck to get it done
Printable View
13.025 @106.82... was really hard on my truck to get it done
16.4@85 >>>>>>>92 D250, VE pump- 3200 spring, home grown fuel pin,AFC down, slight turn on power screw,modified air box, 16cm exh housing, timing stock. total cost around $200- ET gain about 4 full seconds :-) .
still 211.6 minutes.
Was at the track a few weekends ago with a friend. His '00 ram 2500 QCSB that was weighed at 7300lbs trapped 101.57.
His lowest accurate ET was 13.4, with a trap of 99. On the 101.57 run he smoked the lights, which gave him an erroneous 11.75. It was probably a high 12 second pass
Truck has DAP SAC 7x.010s, Borg Warner fmw 62/68/.83w, and a quad adrenaline. Mild 47re with a triple disk converter
I had some kid near me actually put his truck where his mouth was. 88 IDI vs my 2003 Looser paid for the other's admission for the day. He threw a 18.5 at 70 something I got a whopping 16.6 @ 82 Stock besides s&b intake and 4" mbrp
11.67 @115 at full weight, (7400lbs) rolling on 35x12.50's
http://i301.photobucket.com/albums/n...ps08181f13.jpg
Still takes me a day or so.
After some much needed fine tuning on the Firepunk Diesel dyno, (found an additional 54hp....see dyno thread) I hit the track at Edgewater sports park last Saturday for test and tune. Still at full weight, (7400lbs) and still rolling on 35x12.50 mud tires with a 4 1/2" lift. Target E.T. is 11.50 as that is as fast as I can LEGALLY run on any sanctioned track without a cage, 5 point harness, drive shaft loops, etc. etc.
Ran an 11.49 @118mph first pass
http://i301.photobucket.com/albums/n...psnzbcpqem.jpg
And backed that up with an 11.50 flat @118mph
http://i301.photobucket.com/albums/n...pst8blrpfq.jpg
http://i301.photobucket.com/albums/n...psqmtgyg6h.jpg
Crap... my slip is in the truck somewhere....