I want to figure out how to get rid of the wooden poles and then you could really fit some stuff.
My main focus is getting the roof to quit leaking soon.
I've got a whole bunch of it fixed.
Sent from my SM-N981U using Tapatalk
Printable View
That looks like load bearing beams.
I wouldn’t risk removing any of those poles until you get a structural engineer to look at it.
Wish I had a nice garage/barn like that. LOL
2016 Ram 3500 CC 4x4, G56
Some of them posts don't touch the ground in the summertime when they dry out and constrict. [emoji1787]
Sent from my SM-N981U using Tapatalk
I got my intercooler pipes a day early, and I'm off today. [emoji119]
Sent from my SM-N981U using Tapatalk
https://uploads.tapatalk-cdn.com/202...c390af959f.jpg
https://uploads.tapatalk-cdn.com/202...d776627b4c.jpg
https://uploads.tapatalk-cdn.com/202...3363fa3677.jpg
https://uploads.tapatalk-cdn.com/202...78183b00ca.jpg
I got the new intercooler tubing installed, and now it's time to get this actuator off and make a decision.
I cleared the engine codes and took it for a spin; u010C came back after about 15 minutes, and using my odbi2 scan tool to monitor the VGT pos parameter stayed at 4.7 the entire drive.
I got it home, let it cool for a little while, and popped the coolant hose to drain.
Only spilled a little.
Fighting with VGT actuator bolts now.
https://uploads.tapatalk-cdn.com/202...5a10ef2145.jpg
https://uploads.tapatalk-cdn.com/202...f09dde414a.jpg
Sent from my SM-N981U using Tapatalk
So I got the actuator off, and it seems pretty stiff to push by hand, and also I can't move it all the way to the one side, if those marks are where it is supposed to go to.
It will move all the way to the left but that is as far to the right as it will go right now.
Also, it has some play in and out.
https://uploads.tapatalk-cdn.com/202...bd8705cab3.jpg
Sent from my SM-N981U using Tapatalk
I got all the exhaust manifold bolts out, the two lines removed from the top of the turbo, both clamps loosened from the turbo... I'm not gonna be able to get it off tonight.
I have class tomorrow and I have to work Friday through Sunday. @akbob
Sent from my SM-N981U using Tapatalk
Got it off the truck.
Thinking a iron horn 363 1.0 a/r replacement is in order.
https://uploads.tapatalk-cdn.com/202...f54a416b87.jpg
Sent from my SM-N981U using Tapatalk