AlphaRex Performance Headlights Install

Finally had time to upgrade my stock quad headlights.

The past 2 years I had headlight revolution v.2 led bulbs in the stock housing and they were great and made to work for the reflector style housings.

I wanted something black with projector lenses and led with a better cut off line.

I got a 20% off deal for alpharex luxx (led) headlights.

Really impressed on appearance when I first got them.

I've taken headlights out on 4th gens a few times so I didn't think it would be a pain. LOL.

There were some small issues but its all good just took a bit longer to install.

Attachment 13378

From the box.

Attachment 13379

The issue that I had and read online that some have is the is the factory socket for blinker.

Take out factory bulb and plug in the male connector on the

Alpharex housing. It wouldn't fit and I had to file down

The plastic Grey guides in the socket as seen in the picture.

After filing down the connection is solid and pops in like normal.

Main hi low socket plugs right in just as the factory would. Don't forget to slide the lock catch after the plugs are connected.

When installing the headlights make sure that this bottom headlight mount is completely flat with no gaps the bolt should be all the way down and tight.

There is a lock washer that if you do not hold it as you

Tighten the bolt it will spin up.

It's reverse thread for the washer.

To get the washer down and seat and lock with its tab, turn it lefty.

Should look like this.

Attachment 13380

Attachment 13381

The headlight top edge should be flush with no gaps, and snug with the weather stripping.

Attachment 13382

Installed

Attachment 13383

Cutoff line out of the box. I will need to adjust lights

After I put on my thuren lift that I'm doing this Monday.

Don't forget to use some dialetric grease on all connections.

Plus before you hard install make sure the lights function properly.

The Alpharex rex lights came with a full time DRL harness and I did not install this and nor sure if I will.

The DRL lights top and bottom row white light.

Work if when you switch to running lights.

The bottom white DRL is a switch back and turns bright amber for the blinker.

Trying to post a video.

I took it on the phone, but it says it's an invalid file.

Looks great!

Thanks for the write up.

Were these lights expensive?


2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

Quote:

---

Originally Posted by watersupply189

Looks great!

Thanks for the writeup.

Were these lights expensive?

2016 Ram Laramie 3500, G56, 6.7, CC, 4x4

---

They are normally 715$ and I got 20% off.

They look great!

Thanks for your write up!!


2014 Laramie MC 3500 (Aisin) 4X4
MM3/DRD, *** EGR Delete
AFE CAI, 4” FLO-PRO w/muffler, 4” Zone lift w/37 Federal Couragia’s/Black Rhinos

Quote:

---

Originally Posted by cumminsbadgirl

They look great!

Thanks for your write up!!

2014 Laramie MC 3500 (Aisin) 4X4
MM3/DRD, *** EGR Delete
AFE CAI, 4” FLO-PRO w/muffler, 4” Zone lift w/37 Federal Couragia’s/Black Rhinos

---

Thanks
Not much if a write up, just a few points. I left out all the
Uga nuga curse points.
I do believe that some things we do to our trucks when we install ourselves is suppose to be relaxing.
This would of been one of them if beer was my co-pilot.

I saved my curse words for tomorrow when I install
My Thuren 2.25 coils
Trac bar
Active Sway bar
Boogie bumps
Fox 2.0 with resi
New drag link

Shouldn't be that bad, but at very least I'll bust a knuckle and hit my head a few times since that usually gets in the way.

Have a great Oregon Sunday, 90's as its here in Douglas county.

Nice write-up!

A few weeks ago, I replaced my quads with the Alpharex G2.

Very happy with them!

That is a good cutoff line.