Re: 6.7 Turbo Replacement
Quote:
Originally Posted by
Saltwaterdiesel
So it's come time for me to replace the turbo. Only 105k and the VVT is just T now. That's another rant. I got a new and improved replacement from BD with the actuator installed and wondering if anyone has any tips for the removal/installation. Thanks in advance
Sent from my SM-G965U using Tapatalk
Take your time and be patient. Try not to cuss it too much LOL! Shouldn't be too bad of an install.
Re: 6.7 Turbo Replacement
LOL I've got a couple jars of apple pie shine waiting just in case things get too frustrating.
I'm no stranger to engine work but this is my first diesel and first turbo so outside my comfort zone here.
But I figure, I got three days off to learn something new.
Sent from my SM-G965U using Tapatalk
Re: 6.7 Turbo Replacement
OK ya'll this thing is kicking my butt.
How the hell do I get this turbo off the exhaust manifold?
I could barely get that first nut off have absolutely zero clue how I'm going to get the other freaking three.
https://uploads.tapatalk-cdn.com/202...c7ae384c21.jpg
Sent from my SM-G965U using Tapatalk
Re: 6.7 Turbo Replacement
I've not done it myself but heard someone unbolted the manifold and brought it out together.
I'm not sure though.
Someone that knows will chime in.
Sent from my SM-G950U using Tapatalk
Re: 6.7 Turbo Replacement
https://www.freedomracing.com/9866b-...nch-9866a.html
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
1 Attachment(s)
Re: 6.7 Turbo Replacement
See page 5 of 5 #27 of PDF attached. Attachment 9843
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
Re: 6.7 Turbo Replacement
Quote:
Originally Posted by
AK Bob
See page 5 of 5
#27 of PDF attached.
Attachment 9843
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
For some reason, that PDF isn't working for me.
And looks like I gotta make a wrench because I doubt have time to wait for the thing to show up LOL.
Sent from my SM-G965U using Tapatalk
Re: 6.7 Turbo Replacement
Quote:
Originally Posted by
Saltwaterdiesel
For some reason, that PDF isn't working for me.
And looks like I gotta make a wrench because I doubt have time to wait for the thing to show up LOL.
Sent from my SM-G965U using Tapatalk
PB blaster will be your friend if it’s not already.
As mentioned before pulling the manifold with turbo is how I’ve done it but I was replacing manifold as well at the time.
Keep us posted.
1 Attachment(s)
Re: 6.7 Turbo Replacement
I had to log in via the web for the PDF.
Thank you for that.
Now, just to update, I got them all off!
After seeing that tool you shared I remembered curved box end wrenches.
So off to the Harbor Freight.
Picked up these guys. Just so happens my 1/2" drive fit perfect in the 14mm side!
Attachment 9847