Re: What Did You Do On Your Truck Today?
Quote:
Originally Posted by
BubbaJo
I finally got around to installing my block heater cord yesterday.
My driveway sucks and at such a slant that i couldn't get my fat butt under the front of the truck.
So I had to drive up on the bank to gain enough clearance to reach up in there.
Note to self, if I ever have to do this again, don't be driving your truck 10 minutes before hand LOL.
Real close to the oil filter, which gets mighty warm after driving LOL
Attachment 11913
Attachment 11914
Attachment 11915
Nice job looks great! [emoji1303]
You can also install a three-way adapter and add a battery charger later if needed.
One thing I do is plug my power cord into the mounted receptacle first, then apply power to avoid any arcing at bumper mounted receptacle.
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, Fuel Filtration Kit and 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
Re: What Did You Do On Your Truck Today?
That's the exact same place I installed mine. :gjob: Mr BubbaJo
Re: What Did You Do On Your Truck Today?
Quote:
Originally Posted by
SyN
That's the exact same place I installed mine. :gjob: Mr BubbaJo
great minds thing alike ;)
Ak Bob that's a good idea with the 3 prong! I was able to get a timer switch for my truck as well. So in stead of having my truck slurping up power all night, and into the morning until i fire it up, i will have it set to actually start warming up the plugs 2 hours before i go outside to fire up the truck and have it set to turn off power 2 hours after i leave.
Re: What Did You Do On Your Truck Today?
I also forgot to add that i did a couple more small modifications this weekend as well.
Mostly cosmetic this turn around.
I got a stubby radio antenna, and also in-channel vent shades mounted as well.
So when the summer comes, I can have my windows cracked a little to vent out heat (black truck, black interior, tinted windows = lots of heat) and not have to worry about rain getting in.
However I may take them out, and get the ones that go on the outside of the truck vs in the window channel itself.
Re: What Did You Do On Your Truck Today?
Re: What Did You Do On Your Truck Today?
All done just need to use the snap-on scanner tomorrow and test drive it.
Sent from my SM-G973U using Tapatalk
Re: What Did You Do On Your Truck Today?
Time to drive the truck to work very gingerly just waiting to Tom to get back to me with the go ahead after I sent him the CVI files.
https://uploads.tapatalk-cdn.com/202...9687344d3a.jpg
Sent from my SM-G973U using Tapatalk
2 Attachment(s)
Re: What Did You Do On Your Truck Today?
I finally got around to installing my Titan Travel Trekker last weekend.
Had to fab up my own brackets to make it work, due to having a mega cab, and getting the 50-gallon size tank, but it looks pretty good and works as well. :cool:
Attachment 12036
Attachment 12037
Re: What Did You Do On Your Truck Today?
Quote:
Originally Posted by
flanagan
Did you use a scanner or MM3 to pull the CVI Values?
Re: What Did You Do On Your Truck Today?
Had to use the scanner.
Sent from my SM-G973U using Tapatalk