Need A New Tuner: Edit - Ordered a MM3
Hello everyone, I'm new here.
I have an 08 Cummins that has been deleted since 2012.
I have been using a H&S Mini Maxx with overdrive transmission tuning for my revmax 550 transmission.
There MM has recently started acting up and is currently in recovery mode from what I believe is a bad SD card.
I am unable to find SD card files for ver. 6.7.50. The truck is running fine, but I do have a check engine light and a few codes.
I think it's time for a new tuner. Hopefully the MM will let me return the truck to stock, but I don't want to try until I have a new tuner in hand.
What is recommended now days?
I pretty much quit following tuning once I found a setup I was happy with.
I usually run with a mild HP increase (60-80hp) and would like something with trans. tuning.
Any suggestions?
Thank you,
GR
Re: Need A New Tuner: Edit - Ordered a MM3
Welcome!
There are a few newer tuning options available on platforms such as MM3, EFILive & EZLynk.
Loads of information on all 3 is out there once you start looking.
All new members, please read the link below about (FREE) member account privileges.
https://www.igotacummins.com/threads...S-PLEASE-READ!
Greg
2019 | RAM 2500 | CCSB | 6.4 HEMI
2016 | Heartland Pioneer | DS310
Re: Need A New Tuner: Edit - Ordered a MM3
Welcome friend.
2016 Ram Laramie 3500 (DRD), G56, 6.7, Rough Country Leveling, HID headlights, Morimoto LED fogs plus a whole lot more! [emoji106][emoji41]
Re: Need A New Tuner: Edit - Ordered a MM3
Welcome! [emoji3]
2014 RAM 3500 (Aisin) 3.73 4X4 Limited Crew Cab Long Bed DRW. Oil Bypass Filter, 50 Gallon auxiliary fuel tank.
Sent from my iPad using Tapatalk
Re: Need A New Tuner: Edit - Ordered a MM3
Welcome aboard!!!!!!!!!!!!!
Re: Need A New Tuner: Edit - Ordered a MM3
Thanks for all the welcomes everyone!
I decided to ditch the Mini and I ordered a MM3 from DRD.
It should be here next week.
I also ordered a Pyro.
I'm hoping that I can just connect my existing probe to the new "box" that comes with the MM3 Pyro.
As far as I can tell it should work.
I'm not sure how easily the actual probe would be to remove form the manifold since it's been in there for several years.
Either way I'm sure it will all work out and I'm excited for the new tuning!
Re: Need A New Tuner: Edit - Ordered a MM3
Quote:
Originally Posted by
GR128
Thanks for all the welcomes everyone!
I decided to ditch the Mini and I ordered a MM3 from DRD.
It should be here next week.
I also ordered a Pyro.
I'm hoping that I can just connect my existing probe to the new "box" that comes with the MM3 Pyro.
As far as I can tell it should work.
I'm not sure how easily the actual probe would be to remove form the manifold since it's been in there for several years.
Either way I'm sure it will all work out and I'm excited for the new tuning!
The old Pyro won't work friend.
God bless,
igotacummins
Re: Need A New Tuner: Edit - Ordered a MM3
Welcome to the family :welcome:you made the right choice with going to DRD and MM3 you’ll love it :rockon: