Re: 2015 G56 swap won’t start
Did you flash a manual trans tune into he ecm?
Sent from my iPhone using Tapatalk
Re: 2015 G56 swap won’t start
Quote:
Originally Posted by
John Crosby
2015 2500 limited with push button start. I pulled the 68RFE and swapped it with a G56. Got tune for manual trans. Everything installed but can’t get truck to crank over. Need help ASAP. Thanks in advance.
I would get access to a scan tool that can scan all the modules. And see what codes you've got and then go from there. Otherwise you may chase your tail for a good while.
Re: 2015 G56 swap won’t start
If I had to guess it would be because there is multiple modules that talk to the ecm and look for inputs from the auto trans. So in my mind you've got to get all of the modules set up the way a G56 truck would be and not just the pcm. Scanning the truck would uncover that.
Re: 2015 G56 swap won’t start
Did you flash a manual ecm file in to the truck?
Sent from my iPhone using Tapatalk
Re: 2015 G56 swap won’t start
Quote:
Originally Posted by
Dwelsh
If I had to guess it would be because there is multiple modules that talk to the ecm and look for inputs from the auto trans. So in my mind you've got to get all of the modules set up the way a G56 truck would be and not just the pcm. Scanning the truck would uncover that.
When you go into the ecm file say on Warp it gives you all trans options for auto trans on the manual trans program I dont think those options are there because there isnt anything for the ecm to talk to.
Sent from my iPhone using Tapatalk
Re: 2015 G56 swap won’t start
https://www.cumminsforum.com/forum/0...=1245953&=1
Obviously this is a 3rd gen but probably very similar process. I havent done a swap like this so Ill help where I can.
Sent from my iPhone using Tapatalk
Re: 2015 G56 swap won’t start
Quote:
Originally Posted by
KeepEmRollin14
When you go into the ecm file say on Warp it gives you all trans options for auto trans on the manual trans program I dont think those options are there because there isnt anything for the ecm to talk to.
Sent from my iPhone using Tapatalk
Oh yeah. But also we dont even know what all he has done for the swap. Ya know what I mean so it's all speculation cuz itd not just pulling an auto trans out and throwing a G56 in.
Re: 2015 G56 swap won’t start
No. Just a G56 swap. I already have the new G56 tune installed. But it’s not registering the clutch being depressed to allow starter to engage
Re: 2015 G56 swap won’t start
Which module does the clutch pedal position sensor input to on these trucks?
Re: 2015 G56 swap won’t start
Quote:
Originally Posted by
Dwelsh
Which module does the clutch pedal position sensor input to on these trucks?
I thought it was the ecm.
Sent from my iPhone using Tapatalk