Re: RaceMe Ultra amp draw
Quote:
Originally Posted by
buzzard01
Does anyone know how many milliamps the Ultra should use when truck is off and everything is shut down/asleep. My milliamp draw is 0.14 when plugged into the OBD port. When unplugged it drops to 0.02 milliamps. So that shows its using 0.12 when it should be shut down/off. Does anyone know or can test theirs.
Unfortunately I'm traveling at the moment and don't have a multimeter with me.
Subscribed for any info.
Sent from my VS988 using Tapatalk
Re: RaceMe Ultra amp draw
Quote:
Originally Posted by
4kids2dogs&RV
Unfortunately I'm traveling at the moment and don't have a multimeter with me.
Subscribed for any info.
Sent from my VS988 using Tapatalk
Safe travels bro :cool:
Re: RaceMe Ultra amp draw
Something I noticed tonight, I was looking through my security camera at my truck, I noticed the dash light was on.I went to have a look at my truck, no running lights on or dome light. I pulled out my OBD11 pulg and off it went. I did not have my display monitor plugged in.Plugged it back in and went back inside. I saw it come on again and go off 30 seconds later. Went back outside and wiggled the plug went on and off. Pulled it right out and back in, seems to be okay right now,but may have a problem.
Quote:
Originally Posted by
buzzard01
Does anyone know how many milliamps the Ultra should use when truck is off and everything is shut down/asleep. My milliamp draw is 0.14 when plugged into the OBD port. When unplugged it drops to 0.02 milliamps. So that shows its using 0.12 when it should be shut down/off. Does anyone know or can test theirs.
Re: RaceMe Ultra amp draw
Quote:
Originally Posted by
Roberto Fisherman
Something I noticed tonight, I was looking through my security camera at my truck, I noticed the dash light was on.I went to have a look at my truck, no running lights on or dome light. I pulled out my OBD11 pulg and off it went. I did not have my display monitor plugged in.Plugged it back in and went back inside. I saw it come on again and go off 30 seconds later. Went back outside and wiggled the plug went on and off. Pulled it right out and back in, seems to be okay right now,but may have a problem.
I had that problem last year but when I updated my raceme it stopped doing that. Maybe that will help your issue too????? Before the update I noticed that the monitor wouldn't go blank as fast as it used to so I would cycle the key a time or two and that would make every thing shut off.
Re: RaceMe Ultra amp draw
I have the most recent update. I do not seem to have any more issues or at least none I am aware of. My RaceMe does not seem to have any other issues at the moment.
Re: RaceMe Ultra amp draw
I haven't updated since I purchased WARP from @Double R Diesel about a year ago. What update are you guys on?
Re: RaceMe Ultra amp draw
RaceME_Ultra_INIT_2017-08-21_08-00.7z 2.0.0 Firmware, Software RAME006F
New DTCs addressed (U0100, U010C, U010E, P0115) and Speed limiter bug fixed.
Latest Release: Warp.31
We’ve improved and revised the 68RFE tuning parameters.
They have one to support 2018 trucks out also.