How Much Transmission Fluid Needed with Revmax Pan

So I have ordered my Revmax VB along with the Revmax Deep Pan the metal screw on filter fitting, new filters and 3, 1.5 gallon containers of Transmission Fluid and updated prescription from the Dr. My plan is to do it all this weekend, my question is how much fluid should I put into it to start? I don't want to over fill or under fill.

Quote:

---

Originally Posted by Av8r

So I have ordered my Revmax VB along with the Revmax Deep Pan the metal screw on filter fitting, new filters and 3, 1.5 gallon containers of Transmission Fluid and updated prescription from the Dr. My plan is to do it all this weekend, my question is how much fluid should I put into it to start? I don't want to over fill or under fill.

---

I am doing same thing, just waiting to push the order button in a few days.

I read it’s 5.5-6.5 quarts for stock pan. So +4 quarts with Revmax pan.

http://www.cumminshub.com/6.7-cummin...-schedule.html

Nice link, I've been looking for something like that.

Quote:

---

Originally Posted by Teflon

So +4 quarts with Revmax pan.

---

Correct.

Always a good starting point for me to keep track of has much I drained....

Sent from my Pixel 3a XL using Tapatalk

Quote:

---

Originally Posted by 650ram2500

Always a good starting point for me to keep track of has much I drained....

Sent from my Pixel 3a XL using Tapatalk

---

I as well - I always have left over 5qt or 4qt (Empty oil Jugs) as well as 2-3 single qts I just keep around.
It was always a challenge to guess how much splattered everywhere on the initial pan separation.

Once my PPE pan is installed - draining and refilling will be a snap.