I am very dissatisfied with the current MM3 mounts, so I am in the process of building my own.
After A LOT of research I found these two parts that I am making into one mount.
Will report back on the final product.
Attachment 9593
Printable View
I am very dissatisfied with the current MM3 mounts, so I am in the process of building my own.
After A LOT of research I found these two parts that I am making into one mount.
Will report back on the final product.
Attachment 9593
Thought I would share... my way of mounting the tuner.
I drilled a small hole for the wire and use 3M Velcro to mount.
Fits like something from the factory and not bulky appearing at all.
Out of sight unless you want to be looking at it.
https://uploads.tapatalk-cdn.com/201...ee7db74aa8.jpg
https://uploads.tapatalk-cdn.com/201...4801e2f687.jpg
Sent from my iPhone using Tapatalk
Moved mine to the bottom left of the instrument panel. Covers the unnecessary def gauge & rpm gauge below 800 rpms. 90 degree connector & little piece of Velcro. Also picked up a new wire, much tighter connection.
Tachometer I meant.
Was thinking of 3D printing a mount to go in those areas if anyone is interested. Their cheap to make. Was actually working on the design last night haha.
Sent from my SM-G965U using Tapatalk
Hell yes..Let’s see some examples
Sent from my iPhone using Tapatalk
The 3D printer would be ideal. Flush mount in the dash wherever you want. You could also make a blank off plate, if you remove it to sale the truck.
Mine is simple enough. Out of plain sight, for people outside the truck. No damage to the truck. https://uploads.tapatalk-cdn.com/201...49c5e3d7b8.jpgEasy to see while driving
Put mine here. Don’t like advertising my mods. https://uploads.tapatalk-cdn.com/202...4b7780798b.jpg
https://uploads.tapatalk-cdn.com/202...b635529839.jpg
https://uploads.tapatalk-cdn.com/202...b5678ff184.jpg
Sent from my iPhone using Tapatalk