2012 RAM 2500 Transmission Help/Suggestions
Hey all, 2012 2500 68RFE.
H&S tuned and deleted with transmission unlock as well.
37s with 3.73 (at time of issue) gearing... 4.10s on the way.
A while back, I would get an intermittent p0770 shift solenoid code which would put the truck in limp mode.
Maybe once every two weeks.
It’s progressively gotten worse to about once a drive.
Also saw a fuel rail pressure sensor and transmission fluid pressure sensor code pop up once.
It was recommended to replace the TIPM as it seemed like an electrical issue more than a trans issue.
I replaced TIPM, and the issue persisted.
I took my truck into Everett’s Transmission in FL, and he now thinks it’s a transmission problem.
Rather than rebuild the trans, he wants to have me buy a built trans from someone.
Not sure how far down the rabbit hole I’ll end up going. My budget is totally blasted now, so do I put something in to get by?
Is it worth putting in a built transmission and dip further into my emergency fund?
If I get a built trans, do I need to get a new tuner to replace the dated H&S? Etc, etc.
I don’t tow a lot, but it is a consideration.
I also just ordered Yukon 4.10s so that the gearing will be in a better place.
I really appreciate any help you can provide.
Landon
Re: 2012 RAM 2500 Transmission Help/Suggestions
The problem is H&S tuning has been dead for years.
God bless,
igotacummins
Re: 2012 RAM 2500 Transmission Help/Suggestions
Quote:
Originally Posted by
IGOTACUMMINS
The problem is H&S tuning has been dead for years.
God bless,
igotacummins
Think the tuner would cause the P0770 code?
Sent from my iPhone using Tapatalk